Call us on: 01202 717191
0 items: £0.00
UK same day despatch
order before 3pm Free delivery
orders over £150 to England & Wales European shipping
We ship to all European countries Price match
We match all retailers
  1. Home
  2. Sliding Gate Automation
  3. Sliding Gate Kits
  4. BFT ARES Ultra - 24v Sliding Gate Kit

BFT ARES Ultra - 24v Sliding Gate Kit

Product Volt Weight
max
per leaf		 Angle
max
per leaf		 Width
max
per leaf		 Type Price Buy
BFT ARES Ultra BT A 1000
24v
1000kg
13m
Sliding
£958.33+vat

£1,150.00 inc.vat
BFT ARES Ultra BT A 1000
Volt: 24v
Weight (max. per leaf): 1000kg
Angle (max. per leaf):
Width (max. per leaf): 13m
Type: Sliding
£958.33+vat
£1,150.00 inc.vat

Kit Contents

1x Ares Ultra (with built in PCB)
2x Mitto radio transmitters
1x Pair of Compacta 180° photocells
1x Radio antenna
4x 1m CVZ Toothed drive rack

Products bought with BFT ARES Ultra - 24v Sliding Gate Kit

BFT MITTO COOL C2 Remote
BFT MITTO COOL C2 Remote
2-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.
£29.35
BFT Compacta 180° Wired Safety Photocells
BFT Compacta 180° Wired Safety Photocells
Wired Safety Photocells
£104.00
Emergency Stop Button
Emergency Stop Button
Essential item for all gate automation systems to allow the gates to be stopped in an emergency
£15.00

 

Description

The Ares Ultra BT range holds two 24v automatic sliding gate operators, which are both available in kits.

The Ares Ultra BT A1000 is suited to gates weighing up to 1000kg and the Ares Ultra BT A1500 suited to gates weighing up to 1500kg, both equipped with a leaf speed of 9m/min. Featuring a magnetic limit switch and built-in obstable detection through the D-Track system both of these gate operators are suited for long-lasting intensive use.

 

Technical Features

  ARES Ultra BT A1000 ARES Ultra BT A1500
Power Supply 24v 24v
Max Leaf Weight 1000kg 1500kg
Control Panel MERAK-ARES MERAK-ARES
Gate Speed 9m/min 9m/min
Impact Reaction D-Track D-Track
Frequency Of Use Intensive Intensive

 

 

 

 

 

 

 

 

 

Need more information or advice on this kit ? Call our sales support team on 01202 717191.

 

 

Kit Contents

1x Ares Ultra (with built in PCB)
2x Mitto radio transmitters
1x Pair of Compacta 180° photocells
1x Radio antenna
4x 1m CVZ Toothed drive rack
Trustpilot
Proteco Price Match Promise Order before 3pm Why buy from us? Gate Safe
By continuing to use the site you agree to our privacy and cookies policy. Accept

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.