Call us on: 01202 717191

Proteco Ace Gate Opener - Motor Only 230v

Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
Ace 3Ti - Motor Only
230v
350kg
120°
2.0m
Linear Ram Arm, Ambidextrous
£304.92+vat

£365.90 inc.vat
Ace 4Ti - Motor Only
230v
400kg
120°
3.0m
Linear Ram Arm, Ambidextrous
£318.23+vat

£381.88 inc.vat

Kit Contents

1 x Ace Ram Operator
1 x Override Key (for Power Cuts)
1 x Instruction Sheet

 

The Proteco Ace is powerful, quiet and compact.

This motor is suited to gates up to 3.0m (per leaf) and maximum gate weight of up to 400Kg (per leaf).

The Ace motors are constructed of quality die-cast aluminium with stainless steel, bronze and steel parts. It also has inbuilt limit stops (on closing) therefore removing the need for a mid-stop.

The motors are also non-reversible and therefore don’t need the inconvenience or expense of an additional electric lock to keep them closed.

The fluid-grease lubrication system, polyester powder-paint coating, self-lubricating worm gear and built-in thermal protection system ensure quiet operation and a long working life in all weather conditions, without the need for periodic maintenance.

Quick and simple to install it can easily fit on almost any kind of swing gate.

Opening angles of up to 120° are achievable with this kit but will rely on specific hinge positioning (see instruction manual for more information).

 

Product Details

Ace 3TI

Ace 4TI

Opening time

17 seconds

22 seconds

Frequency of use

Domestic use only

Domestic use only

Opening direction

Inwards

Inwards

IP rate

44

44

Aerial range

30m

30m

Extra safety cells required

Additional photocells recommended

Additional photocells recommended

Limited warranty (Motor)

3 Years

3 Years


 

Need more information or advice on this kit ? Call our sales team on 01202 717 191.

 

Kit Contents

1 x Ace Ram Operator
1 x Override Key (for Power Cuts)
1 x Instruction Sheet
Proteco Price Match Promise Order before 3pm Why buy from us? Gate Safe

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.