Call us on: 01202 717 191

SSP Weatherproof IP66 External Push Button

Product Details Price Buy
SSP External Push Button
This weatherproof stainless steel low profile button is IP66 rated,making it ideal for outside use.

£59.99 inc.vat

Kit Contents

1 x External Push Button


This weatherproof stainless steel unit with low profile button is IP66 rated, making it ideal for use outside. 

Completely weatherproof

This steel fronted, prestige press to open button is designed to prevent water ingress. It features a unique cable gland to ensure there is no way for water to get in. It also has a rainshield enclosure to give it additional protection. 

How it works
This robust exit button is designed to release a door (magnetic locks) whilst the button is pressed. Put another way, as soon as the operator releases this momentary release button the door should lock immediately (if it is in the closed position). 

Suitable for outside use

Being IP66 rated, this momentary press to open button can be fitted anywhere inside or out. 

Stainless Steel for best possible finish
Stylish stainless steel will look good in any area of the building 

No extra signage needed
The standard safe condition/evacuation green is used to ensure the button is easily located. 

Reliable and durable
Tested to exceed 1 million separate uses

Stainless steel plate:
 90mm high x 90mm wide
Load: 4A @ 30VAC/DC
Switches: < 30volts DC/AC
Mounting: Flush or surface with back box
Material: Plastic dome, steel plate, plastic back box
Fixing: Single fixing and wiring point
IP Rating: IP 66
Double Pole: NO (Normally Open) / NC (Normally Closed) 



Kit Contents

1 x External Push Button

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.