Call us on: 01202 717 191

FAAC 884 Mc 3Ph 400V Motor Only

Product Volt Weight
per leaf
per leaf
per leaf
Type Price Buy
FAAC 884 MC 3PH Sliding Gate Motor Only
Motor only, Sliding gate

£2,497.68 inc.vat

Kit Contents

1 x Gear Motor
1 x Control Board 884 T
1 x Limit switch counter plates
  • Ideal for large industrial gates with intensive use
  • Self breaking motor guarantees reduced stop spaces and keeps the system mechanically locked when the motor is not in operation.
  • In the event of a power failure, the lever operated release device makes it possible to open and close the gate manually.
  • Twin-disk clutch in oil- bath
  • Base with levelling screws
  • Steel housing protected by cataphoresis treatment and polyester paint


Designed to move industrial gates in the simplest and safest way.

“Industrial” duty is assured by the gearmotor’s exceptional performance, enabling intensive use frequency.

The special twin-disk clutch, in an oil bath, enables drive torque adjustment from 0 to 155 daN.

The steel housing is cataphoresis treated and polyester painted making it highly resistant to varying environmental conditions, offering reliability to meet the most severe demands.

Automation is controlled by a high-tech control board with microprocessor, which controls all the necessary functions and is designed for connection to control, safety and signalling devices.

Constant oil bath lubrication of mechanical components plus assembly in a high resistance pressure-cast enbloc aluminium body ensure a long operating life.


Technical Specifications of FAAC 884 MC 3PH 400V

Power supply voltage 400v AC
Power 850w
Current 1.6 A
Torque from 0 to 155 Nm
Weight 50 kg
Type of oil FAAC HP OIL
Use frequency (%) 100% (up to 2000kg) 50% (over 2000kg)
Motor rotation speed 1400 rpm
Operating ambient temperature -20 °C to +55 °C
Dimensions (L x D x H) in mm 430 x 310 x 586
Protection class IP 55
Gate speed 10 m/min (Z16)
Limit Switch With lever and roller microswitch
Clutch Twin-disk in oil-bath
Max weight 3500 kg

Kit Contents

1 x Gear Motor
1 x Control Board 884 T
1 x Limit switch counter plates

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.