Call us on: 01202 717 191

FAAC 413 Motor Only

Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
FAAC 413 Motor Only 24v
24v
200 kg
110°
2.5m
Linear Ram, Ambidextrous
£356.99+vat

£428.39 inc.vat
FAAC 413 (LS) Motor Only 24v
24v
200 kg
110°
2.5m
Linear Ram, Ambidextrous, Limit Stops
£320.06+vat

£384.07 inc.vat
FAAC 413 Motor Only 230v
230v
200 kg
110°
2.5m
Linear Ram, Ambidextrous
£277.99+vat

£333.59 inc.vat
FAAC 413 (LS) Motor Only 230v
230v
200 kg
110°
2.5m
Linear Ram, Ambidextrous, Limit Stops
£313.91+vat

£376.69 inc.vat

Kit Contents

1 x FAAC 413 Motor

Electro-mechanical operator

for residential swing gates with a single max length of 1.8m (2.5m with electric lock).

 

  • Integrated opening and closing mechanical stops (the travel limit mechanical stops need not be installed).
  • Available in versions with/without a travel limit device ('LS' version is with).
  • Half bodies are coupled with a seal in pressure cast.
  • Die-cast aluminium body, entirely double-coat painted for longer life.
  • Manual release device with simplified key-protected activation.
  • Travel limit devices (if present) for maximum safety, with facility for controlling travel limit stops and slow-down.
  • Horizontal exit for cables to allow low installation.
  • Designed for use with the "Gatecoder" obstacle detection device (230v version).
  • 24v version has the option to have an emergency battery to ensure operation in case of powercut. Also has virtual encoder and anti-crushing device which means if something or somebody comes into contact with the gate while it's in motion it will stop and back off.

 

Dimensions

 

Technical Specifications of 413 230v

  413
Power supply 230 V ac
Power 250 W
Current 1.1 A
Thermal protection 140 °C
Capacitor 6.3 µf
Thrust 200 daN
Rod stroke 300 mm (350 mm without mechanical stops)
Rod extension speed 1.6 cm/sec
Leaf max. length 2.5m
Type and frequency of use at 20 °C S3 - 30% (413) S3 - 35% (413 LS)
Indicative maximum hourly cycles at 20 °C ~30
Operating ambient temperature -20 °C to +55 °C
Weight of operator 6.5kg
Dimensions (L x D x H) in mm 785 x 105 x 148
Protection class IP 44
Travel limit microswitches No (413) Yes (413 LS)
Opening and closing mechanical stops Yes

 

Technical Specifications of 413 24v

  413 24v
Electric motor voltage 24 V dc
Power supply voltage 230 Vac
Power 70 W
Current 3 A
Thermal protection -
Capacitor -
Thrust 250 daN
Rod stroke 300mm (350mm without mechanical stops)
Rod extension speed 1.6cm/sec
Leaf max. length 2.5m
Type and frequency of use at 20 °C 100%
Indicative maximum hourly cycles at 20 °C ~100
Operating ambient temperature -20 °C to +55 °C
Weight of operator 6.5kg
Dimensions (L x D x H) in mm 785 x 105 x 148
Protection class IP 44
Travel limit microswitches No (413 24v) Yes (413 LS 24v)
Opening and closing mechanical stops Yes

Kit Contents

1 x FAAC 413 Motor

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.