MyGate myShark Motor Only 230v Underground Opener
| Product | Volt | Weight max per leaf |
Angle max per leaf |
Width max per leaf |
Type | Price | Buy |
|---|---|---|---|---|---|---|---|
| myShark - 230v - Motor Only | 230v |
350kg |
110° |
3.0m |
Underground, Ambidextrous |
£372.68+vat
RRP £581.38 |
|
myShark - 230v - Motor Only
Volt: 230v
Weight (max. per leaf): 350kg
Angle (max. per leaf): 110°
Width (max. per leaf): 3.0m
Type: Underground, Ambidextrous
£372.68+vat
RRP £581.38
RRP £581.38
Kit Contents
1 x Motor (includes transmission lever)
1 x Override Key (for Power Cuts)
1 x Instruction Sheet
1 x Override Key (for Power Cuts)
1 x Instruction Sheet
NB:MOTOR ONLY NO FOUNDATION BOX INCLUDED
The myShark underground motor is one of our most discreet systems to power single or double gates. As well as being discreet, it is also super quiet making it our top recommendation for underground automation.
The myShark motor mechanics are buried within secure steel (choose from galvanised or stainless) underground foundation boxes for ultimate waterproofing and durability.
The powerful electro mechanical motor will operate gates up to 3m in length and can open outwards or inwards. The unit also has in-built opening & closing limit stops.
The fluid-grease lubrication system and the built-in thermal protection ensures a long-lasting working life in any weather conditions without the need for periodic maintenance.
As standard the mySark opens to a 90° angle but will extend to 180° with an adaptor (gate hinge position dependant).
The operators are non-reversible and therefore don’t need the inconvenience or expense of an additional electric lock to keep them closed.
How do I tell if I need a left or right hand kit?
Left and and Right hand gates are denoted by the type of bracket. The way to tell which handed kit you need is by looking from the back of the gates from the inside of the driveway with the property to your back – if the gate is hinged on the left, it’s a left handed gate. If the gate is hinged to the right, it is a right handed gate.
Installation Advice
The myShark underground foundation box is installed beneath the gate at the foot of the hinge pillar.
The minimum distance between the vertical centre line of the hinges and the inner face of the pillar is 65mm. There must also be at least 65 mm between the lid of the foundation box and the bottom of the gate.
If fitting underground drivers to wooden gates it will be necessary to clad the gate bottom edge with metal to spread the load and to give something to attach the motor shoe. If you don't, the push/pull from the high torque will eventually split the wood.
All underground motors will operate underwater when new, but if left submerged, it is likely that water will eventually enter the motor and the cable insulation will become porous. It is better to correctly drain the foundation cases from day one to protect your investment! Some additional fabrication/welding may be necessary to connect the drive shoe to your gates.
|
Product Details |
myShark |
|
Operation |
Single swing underground |
|
Motor type |
Underground gear motors |
|
Power Supply |
230v |
|
Control panel |
Q80A |
|
Gate speed |
1400 rpm |
|
Inbuilt aerial range |
30m |
|
Max opening angle |
110° |
|
Frequency of use |
Idealy less than 15 operations a day |
|
Opening direction |
Inwards or outwards |
|
Thermal protection |
150°c |
|
Lock required |
No |
|
Extra safety cells required |
Additional photocells recommended |
|
Limited warranty (Motor) |
3 Years |
Need more information or advice on this kit ? Call our sales team on 01202 717 191.
myShark optional upgrades and accessories include:
* gate stops (all of our gate motors require some form of resistance at the end of the opening & closing phase.)
* underground exit loop (detects the presence of a vehicle and automatically opens the gate)
* extra photocells
* additional key fobs
* intercom kit
* extended range (external) aerial
Kit Contents
1 x Motor (includes transmission lever)
1 x Override Key (for Power Cuts)
1 x Instruction Sheet
1 x Override Key (for Power Cuts)
1 x Instruction Sheet
