Call us on: 01202 717 191

Proteco PTP45 Tubular Motor For Shutters And Awnings

Image for Proteco PTP45 Tubular Motor For Shutters And Awnings

Kit Contents

1 x Motor 230V - size ø45mm
1 x Split pin
1 x Adjusting key for limit stops
1 x Motor bracket
1 x Octagonal adapter for ø60mm shaft
1 x Adapter for emergency release mechanism
1 x Eyelet for emergency release (170mm)
Product Details Price Buy
Proteco PTP45 50M Tubular Motor
PTP45 50N 230V Tubular Motor with Manual Release
£117.00+vat

£140.40 inc.vat

Proteco PTPQ01
Concealed control panel with radio receiver
£75.00+vat

£90.00 inc.vat

Proteco PTPX1- 1 Channel Radio Transmitter
1-channel radio transmitter 433Mhz
£30.00+vat

£36.00 inc.vat

Proteco PTPX1 4-Channel Radio Transmitter
4-channel radio transmitter 433Mhz
£36.00+vat

£43.20 inc.vat
Proteco PTP45 20 Tubular Motor
PTP45 20n 230V Tubular Motor
£56.00+vat

£67.20 inc.vat
Proteco PTP45 30 Tubular Motor
PTP45 30N 230V Tubular Motor
£59.00+vat

£70.80 inc.vat
Proteco PTP45 50 Tubular Motor
PTP45 50N 230V Tubular Motor
£63.00+vat

£75.60 inc.vat

Tubular motor Ø 45 mm for blinds and awnings


• 230V motor with electro-brake, quiet and powerful.
• Mechanical limit stop with easy adjustment for up and down limit positions.
• Ideal for existing shutters, complete with cable and motor bracket
• Octagonal adapter for Ø60mm shaft

 

PTP45 20 - PTP45 30 - PTP45 50

230V tubular motors size Ø 45mm with mechanical stop

PTP45 50M

Tubular motor 230V Ø 45mm with mechanical stop and manual emergency override system
The manual release system allows emergency opening and closing of the shutter even in case of power cuts.

Technical Specifications

  PTP45 20 PTP45 30 PTP45 50 PTP45 50m
Torque: 20Nm 30Nm 50Nm 50Nm

Speed RPM:
16 16 12 12
Limit Switch Turns: 30 30 30 30
Motor Power: 170 W 240 W 270 W 270 W

Consumption:
0,80 A 1,10 A 1,20 A 1,20 A
Weight: 260 Kg 270 Kg 280 Kg 380 Kg

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.