Call us on: 01202 717 191

FAAC 455 D Control Board

Product Details Price Buy
FAAC 455 D Control Board
A reliable control board which can power one or two operators. Also includes signalling status via display.

£282.00 inc.vat

Kit Contents

1 x FAAC 455 D Control Board

Only compatible with the FAAC Automation range

The FAAC 455 D is a reliable control panel which can power one or two operators. Also includes signaling status via display.


Can be used with the FAAC 390 230v operator, the FAAC 413 230v LS version, the FAAC 415 230v LS version operator and the FAAC 412 230v operator.


Technical Specifications

Power supply voltage 230 Vac (+6% -10%) - 50 Hz
Absorbed power 10 W
Motor max. load 800 W
Accessories max. load 500 mA
Electric lock max. load 15 VA
Operating ambient temperature -20 °C to +55 °C
Protection fuses


Terminal board inputs Open/Open free leaf/Stop (closed)/Opening safety devices/Closing safety devices/power supply+earth/opening and closing limit switches (gatecoder)
Terminal board outputs Flashing lamp/motors/24 Vdc power supply accessories/24Vdc Indicator light/fail safe/12 Vac electric lock power supply
Rapid connector Decoding cards/RP card receivers
Status signalling via display



Functions (programming by display and push-buttons)

Function logics Semi-automatic / Automatic / Safety / "stepped" semi-automatic / "stepped" automatic / "stepped" safety / Semi-automatic B / "Dead man" C
Open and closing time Programmable (0 to 120 s)
Pause time Programmable (0 to 4 min.)
Closing leaf delay Programmable (0 to 4 min.)
Thrust power Adjustable on 50 levels for each motor
Work times learning (0 to 120 s) Simple (work time self-learning of both leafs simultaneously). Complete (work time "manual" learning of each leaf with possibility to activate timed travel limit "decelerations")
Deceleraetion timed / with limit switch / with gatecoder
Advanced programming  
Maximum torque at initial thrust  Selectable (useful for heavy-weight leafs)
Final stroke on closing Selectable (makes the locking of the electric lock easier)
Reversing stroke Selectable (makes the release of the electric lock easier)
Pre-flashing 5 s (selectable)
Opening leaf delay 2 s (can be disabled)
Closing photocell logic Reverses on release/reverses immediately
Fail safe (photocell test) Selectable
Electric lock on second leaf Selectable
Cycle count Selectable (updating of a "count-down" - max. setting 99.000 thousand cycles)
Service request Selectable (when the numbers of cycles set by program is "reached", the system activates a preflashing of 8 s before every opening movement)
Indicator light/timed output Selectable (the indicator light output can also be used as a timed output - max 4 min.)

Kit Contents

1 x FAAC 455 D Control Board
Trustpilot Rating

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.