CAME FrogAE - Underground Single Swing Gate Kit
Product |
Volt |
Weight max per leaf |
Angle max per leaf |
Width max per leaf |
Type |
Price |
Buy |
CAME FrogAE-S Kit
|
230v |
400 kg |
110° |
3.5m |
Underground, Ambidextrous |
£881.67+vat
RRP £1,269.60 Save 17%
|
|
CAME FrogAE-S24
|
24v |
400 kg |
110° |
3.5m |
Underground, Ambidextrous |
£798.10+vat
RRP £1,153.87 Save 17%
|
|
CAME FrogAE-S Kit
Volt: 230v
Weight (max. per leaf): 400 kg
Angle (max. per leaf): 110°
Width (max. per leaf): 3.5m
Type: Underground, Ambidextrous
£881.67+vat
RRP £1,269.60 Save 17%
CAME FrogAE-S24
Volt: 24v
Weight (max. per leaf): 400 kg
Angle (max. per leaf): 110°
Width (max. per leaf): 3.5m
Type: Underground, Ambidextrous
£798.10+vat
RRP £1,153.87 Save 17%
Kit Contents
1 x Motor
1 x Foundation Box
1 x Frequency Card
2 x Wired Safety Photocells
1 x Control Board
2 x Radio Remote
1 x Antenna
1 x Release Mechanism
1 x Instruction Manual
Products bought with CAME FrogAE - Underground Single Swing Gate Kit
Do you want to add Automation Control from your Smartphone? Call the office on 01202 717191 to upgrade your kit and get an exclusive discount on the CAME RGSM Connectivity Kit.
The hide-away solution to apply to gates in residential and apartment block settings
- The underground solution for gate automation.
- High-grade of protection from enviromental agents (IP67).
- The system automatically locks back after gate is manually released.
- Can open as wide as 180 degrees (with 001FL-180).
- 001FROG-AE and 001FROG-A24E featuring encoder-based technology, tested according to current legislative standards.
- The 24 V version can function in emergency mode during power cuts.
- Special corrosion resistant all-steel foundation box.
- Built-in adjustable mechanical stops.
- The CAME FrogAE-S comes with the ZM3E control panel.
- The CAME FrogAE-S24 comes with the ZL170N control panel.
All underground motors will operate underwater when new, but if left submerged, it is likely that water will eventually enter the motor and / or cable insulation will become porous. It is better to correctly drain the foundation cases from day one to protect your investment! Some additional fabrication/welding may be necessary to connect the drive shoe to your gates.
Remember if fitting underground drivers to wooden gates, it will be necessary to clad the gate bottom edge with metal to spread the load and to give something to attach the motor shoe. If you don't, the push-pull from the high torque will eventually split the wood.
Need more information or advice on this kit ? Call our sales support team on 01202 717 191 or complete our site assessment form and we can advise the right kit for your installation.

