Call us on: 01202 717191

BFT PHOBOS BT B - 24v Single Swing Gate Kit

Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
BFT PHOBOS BT B25 Single
24v
400kg
119°
2.5m
Linear Ram
£498.27+vat
RRP £830.45 Save 28%

£597.92 inc.vat
BFT PHOBOS BT B40 Single
24v
700kg
130°
4m
Linear Ram
£612.55+vat
RRP £1,020.92 Save 28%

£735.06 inc.vat

Kit Contents

1 x Phobos BT B Operator
1 x Thalia A80 Control Panel & Receiver
2 x Mitto Cool Radio Transmitters
1 x Pair of Compacta 180° Photocells
1 x Radio Antenna

 

The Phobos BT B range consists of two motor types. The Phobos BT B25 and the Phobos BT B40 are irreversible electromechanical 24V operators suitable for swing gate leafs up to 4m long and weighing up to 700kg.

 

The new & improved Phobos BT B Range

Following in the footsteps of the Phobos BT A25 & BT A40 the new BT B single kit includes the next generation of electromechanical operators. The new Phobos BT B operators are 30% faster than the original BT A range, while also running quieter than the previous model.

The Phobos BT B25 is suitable for leaf weights of up to 400kg, while the new Phobos BT B40 is also now able to support a max leaf weight of 700kg, making it a suitable choice for even larger access solutions.

Obstacle detection

The management and control system of the D-Track pair ensures maximum safety for people and property, as well as making it easier to certify the system. The installation is easy and fast due to the magnetic limit switch at the top of the motor and the exclusive function that helps the installer to position it correctly using the motor’s vibration.

 

  Phobos BT B25 Phobos BT B40
Power Panel Supply  230v 230v 
Control Unit Thalia BT A80  Thalia BT A80 
Operator Type Electromechanical gates  Electromechanical gates 
Max Gate Width 2.50m  4m 
Max Length Gate Panel without Electric Lock 2m  3m 
Max Gate Weight 400kg  700kg 
Motor Voltage 24v  24v 
Power Consumption 40w  40w 
Thrust and Traction Force 2,000N  2,000N 
Shaft Working Stroke 360mm  470mm 
Maximum Angle 119°  130° 
90° Opening Time* Approx.13s  Approx. 16s
Limit Switch Type Magnetic Magnetic 
Slowdown of Movements Yes  Yes 
Impact Reaction D-Track  D-Track 
Locking Mechanical  Mechanical 
Unlocking Bespoke Key Bespoke Key 
Max Opening Cycles per Hour 30  30 
Environmental Conditions -20 - 55°C  -20 - 55°C 
Protection Rating IP44   IP44

* except deceleration, maximum gate and maximum weight.

 

Need more information or advice on this kit ? Call our sales support team on 01202 717 191 or complete our site assessment form and we can advise the right kit for your installation. 

 

Kit Contents

1 x Phobos BT B Operator
1 x Thalia A80 Control Panel & Receiver
2 x Mitto Cool Radio Transmitters
1 x Pair of Compacta 180° Photocells
1 x Radio Antenna
Proteco Price Match Promise Order before 3pm Why buy from us? Gate Safe

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.