- Double Gate Automation
- Single Gate Automation
- Sliding Gate Automation
- Intercom systems
- Safety Devices
- Gate Accessories
- MyGate Automation
- Proteco Automation
- Came Gate Automation
- FAAC Gate Automation
- Nice Automation
- BFT Automation
- ACI Farfisa
- BPT Intercoms
- Vehicle Access Control
- Home Automation
- AES Intercoms
Kit Diamond - Electric Single Swing Gate Opener Kit
|1 x||Diamond Ram Operator|
|2 x||Wired Safety Photocells|
|1 x||Electronic Control Unit (with in-built 30m aerial)|
|1 x||Remote Keyfob Controller|
|1 x||Override Keys (for power cuts)|
|2 x||Brackets & fittings|
|1 x||Instruction Sheet
Purchase options for Kit Diamond - Electric Single Swing Gate Opener Kit
Optional additional accessories for Kit Diamond - Electric Single Swing Gate Opener Kit
Emergency Stop Button - Twist Release
|This is an essential item for all gate automation systems and should be installed in a place visible to all users to allow the gates to be stopped in an emergency. When required the emergency stop must be accessible, recognisable and must work, reliably and safely.||£8.08|
2.0m - 25mm gate safety edge
|2.0m Length of 25mm profile gate safety edge.
All automatic gates & door systems installed in the UK should comply to BS-EN13241-1 & EN-138491-1 safety standards.
Profile & length options:- Safety Edges Options
Safety edge guide:- Download
Single Gate Stop Set
|1 x Back Stop and 1 x Mid Stop in a black powder coated finish for single gates. This gate system requires external resistance.||£33.00|
MyGate Grey Key Fob
|Additional Grey Remote Control Key Fob/Transmitter/Remote. The gate system can support atleast 99 additional keyfobs.||£35.99|
|Standard surface mounted digipad/keypad. Allows users to get in or out of the gate without a key fob.||£125.40|
TPSL03 Outdoor Single Gang Bell Push
|Timeguard powerseal IP54 gate bell button push switch. Allows users to get in or out of the gate without a key fob.||£11.58|
Wireless Photocell Kit Upgrade
|Upgrade to wireless photocells with any of the above kits. (Only available in combination to a Gate Motors single gate kit).||£15.42|
|Safety+ Wireless Upgrade||This wireless upgrade includes 2x Wireless Photocells and 1x Emergency Stop Button.||£66.83|
Standard Electro Lock (inc. interface) for Kit Diamond
|Horizontal Electro Lock (inc. interface) for Diamond Kit. Keeps the gate firmly shut/locked. Recommended for gates over 3m.||£91.74|
|Blank Release Key||Blank Release Key, to release the gearing in the event of a power failure. A key is already included with each motor in the kit.||£3.60|
EMIS120 GSM/Wifi Switch
|Smartphone (GSM) and Internet compatible gate opener switch (2-Outputs/Channels)||£159.00|
This kit has 3 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 3 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.
The GateMotors Kit Diamond electromechanical ram kits are a cost effective method of gate automation. They are ideal where the gates are hung in the middle of the posts, or close to the edge of the pillars (see diagrams on the Technical Info page). Their advantage over the Gatemotors Kit Aster or other traditional ram styled kits is their slim-line design and slightly more powerful motor. The rams are non-reversible and therefore don’t need the inconvenience or expense of an additional electric lock to keep them closed.
You can achieve up-to 120° opening angles, depending on hinge position and model in use; suited to gate openings of up to 4m. These motors are only suitable for inward opending gates. See limits of use below :
The GateMotors slimline Kit Diamond is designed for intensive use; motors are constructed of quality die-cast aluminium with stainless steel, bronze and steel parts.
The fluid-grease lubrication system, polyester powder-paint coating, self-lubricating worm gear and built-in thermal protection system ensure quiet operation and a long working life in all weather conditions, without the need for periodic maintenance.
The aerial within the kit is pre-installed and has a range of approx 30m.
How Do I tell if I need a left Hand kit or right hand kit?
Example shown is a Left Hand gate arrangement.
Left and and Right hand gates are denoted by the type of bracket. The way to tell which handed kit you need is by looking from the back of the gates from the inside of the driveway with the property to your back – if the gate is hinged on the left, it’s a left handed gate. If the gate is hinged to the right, it is a right handed gate.
With all linear automation (straight arm motor) the laws of geometry do apply. These are a series of measurements that aid the motors to pivot on its triangular mounting bracket. If the measurements are not achieved, the motor will not pivot on its bracket and the gate will fail to achieve its full opening angle.
Below pictures are birds-eye views of two types of typical gate leaf mounting:
FIG 1 – Gate leaf hinged in the centre of the pillar
FIG 2 – Gate leaf hinged on corner of the pillar
The Kit Diamond operator and bracket are positioned so as dimensions A & B comply to the installation instructions supplied with the kit.
The values are dependent on the Kit Diamond model selected.
Dimensions to Achieve
For the Kit Diamond 3Ti
A = 145mm
B = 145mm
For Kit Diamond 4Ti
A = 195mm
B = 195mm
For Kit Diamond 4TA (2m max per leaf)
A = 195mm
B = 195mm
IF DIMENSIONS FOR THE INSTALLATION ARE NOT ACHIEVED, THE MOTOR(S) WILL FAIL AND MAY BREAK. DAMAGES TO THE MOTOR(S) RESULTING FROM INADEQUATE INSTALLATION IS NOT COVERED UNDER OUR 1 YEAR GUARANTEE
When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.
This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.
If you only have a single gate and you are not sure if you need a right-hand or left-hand kit?
The motor is usually mounted on the inside of the property for security; so view the gates from inside the property looking outwards (the gates will normally, but not always, swing toward you).
If the hinge appears on the left, you need a left-hand kit; if it's on the right you need a right-hand kit.
For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.
Kit Diamond optional upgrades and accessories include:
* gate stops (all of our gate motors require some form of resistance at the end of the opening & closing phase.)
* underground exit loop (detects the presence of a vehicle and automatically opens the gate)
* extra photocells
* additional key fobs
* intercom kit
* extended range (external) aerial
Please Note: It is solely the responsibility of the recipient or the client / specifier – to ensure that the products described are suitable for purpose (see fitting guide under downloads) & comply with the relevant building regulations.
|Got a question about this item?|