- Double Gate Automation
- Single Gate Automation
- Sliding Gate Automation
- Intercom systems
- Safety Devices
- Gate Accessories
- MyGate Automation
- Proteco Automation
- Came Gate Automation
- FAAC Gate Automation
- Nice Automation
- Mhouse Automation
- BFT Automation
- ACI Farfisa
- BPT Intercoms
- Vehicle Access Control
- Home Automation
- AES Intercoms
MyGate MyHook Motor Only - 230v Articulated Opener
|1||x||Override Key (for power cuts)|
Purchase options for MyGate MyHook Motor Only - 230v Articulated Opener
Optional additional accessories for MyGate MyHook Motor Only - 230v Articulated Opener
This motor has 3 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 3 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.
The GateMotors MyHook Motor articulated arms are quick and easy to install and ideal for DIY installation or gates installed between brick or stone pillars with leaves up to two metres each, especially where the Gatemotors Aster Ram or Diamond Ram can’t be fitted.
It can be fitted to gates that open either outward or inward without the need for special modification; gate openings up to 4m (2m per leaf) and up to 250Kg per leaf. Opens to 130°.
Opening angles of up-to 130° may be achieved dependent on gate hinge position. The operators are non-reversible and therefore don’t need the inconvenience or expense of an additional electric lock to keep them closed.
Suitable for big dimensioned pillars with maximum distance between the hinges' axis and the gate's corner of 30 cm.
Easy installation, with adjustable accessories and brackets. Incorporated release key. Pivoted arm transmission adjustable and anti-shearing safety. The perfect integration of its components ensures the greatest quietness.
It is designed for intensive use by using a die-casting structure made of quality aluminium, stainless steel, bronze and steel. The fluid-grease lubrication system and the built-in thermal protection ensure a long-lasting working life in any weather conditions without the need for periodic maintenance.
These diagrams show the gates closed and the operators fixed to the inside edge of each pillar (inside the property). The plan view diagrams below show the operator and gate closed and open. The dimension A, between the pillar mounting face of the operator and the centre line of the gate, can be up to 300mm. Dimension B is recommended to be 30mm.
When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.
This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.
If you only have a single gate and you are not sure if you need a right-hand or left-hand motor?
The motor is usually mounted on the inside of the property for security; so view the gates from inside the property looking outwards (the gates will normally, but not always, swing toward you).
If the hinge appears on the left, you need a left-hand motor; if it's on the right you need a right-hand motor.
For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.
Please Note: It is solely the responsibility of the recipient or the client / specifier – to ensure that the products described are suitable for purpose (see fitting guide under downloads) & comply with the relevant building regulations.
|Got a question about this item?|