Kit MyShark - Underground Double Swing Gate Openers

Kit Contents

2 x MyShark Motors
2 x Underground chambers
2 x Safety Photocells
1 x Electronic Control Unit (with in-built 30m aerial)
2 x Remote Keyfob Controllers
1 x Override Keys (for power cuts)
1 x Instruction Sheet

Purchase options for Kit MyShark - Underground Double Swing Gate Openers

Product Volt Weight
per leaf
per leaf
per leaf
Type Price Buy
Double Kit MyShark Galvanised (Q80A) 230v 350 kg 110 3.0m Underground, Double Kit £723.10 ex VAT
£867.72 incVAT
RRP £1783.69 incVAT
Save 51%
Add to cart
Double Kit MyShark Stainless Steel (Q80A) 230v 350 kg 110 3.0m Underground, Double Kit £851.68 ex VAT
£1022.02 incVAT
RRP £2033.15 incVAT
Save 49%
Add to cart

Optional additional accessories for Kit MyShark - Underground Double Swing Gate Openers

Product Details Price Buy
Resistive Safety Edge 25mm Profile - 2.0m Length
2.0m - 25mm gate safety edge
2.0m Length of 25mm profile gate safety edge.

All automatic gates & door systems installed in the UK should comply to BS-EN13241-1 & EN-138491-1 safety standards.

Profile & length options:- Safety Edges Options

Safety edge guide:- Download
£138.00 Add to cart
Grey Key Fob Additional Grey Remote Control Key Fob/Transmitter/Remote/ £35.99 Add to cart

Additional Wired Photocells
A pair of additional wired safety photocells, as supplied in our gate kits £43.02 Add to cart

Emergency Stop Button - Twist Release
This is an essential item for all gate automation systems and should be installed in a place visible to all users to allow the gates to be stopped in an emergency. When required the emergency stop must be accessible, recognisable and must work, reliably and safely. £8.08 Add to cart
Eldes EMIS120 GSM Wifi Switch
EMIS120 GSM/Wifi Switch
Smartphone (GSM) and Internet compatible gate opener switch (2-Outputs/Channels) £159.00 Add to cart


Looking for the single gate Kit MyShark, then view our range of single swing gate openers.

The GateMotors Kit MyShark underground kit is our premier product offering the most visually and aurally discreet gate automation system; will open outwards or inwards if required.

This kit is one of our most popular and is recommended for new and existing swing gates, up to 3 metres each, hung on posts or pillars. May be fitted to gates that open outwards or inwards. Opening angles up to 180° (angles between 90° - 180° requires optional adaptor) may be achieved dependent on gate hinge position.

The operators are non-reversible and therefore don’t need the inconvenience or expense of an additional electric lock to keep them closed.

If you don't want unsightly above ground stops, then you this unit is ideal as it has in-built Opening Limit Stops & Closing Limit Stops which fit into the underground motor chambers to restrict the movement at the limits of travel.

The motor mechanics are buried within secure steel (choose from galvanised or stainless) underground foundation boxes so as not to compete with the aesthetics of your gates; all that can be seen is the steel lid covering the operator box and a very small unobtrusive operator attached to the bottom edge of the gate leaf.

As the motors are contained underground, environmental noise intrusion is minimal. Designed for an intensive use by using a die-casting structure made of quality aluminium, stainless steel, bronze and steel.

The fluid-grease lubrication system and the built-in thermal protection ensures a long-lasting working life in any weather conditions without the need for periodic maintenance.

The aerial within the kit is pre-installed and has a range of approx 30m.

Blank Installation Guide

The GateMotors Kit MyShark underground kit foundation box is installed beneath the gate at the foot of the hinge pillar.

The minimum distance between the vertical centre line of the hinges and the inner face of the pillar is 65mm. There must also be at least 65 mm between the lid of the foundation box and the bottom of the gate.

Remember if fitting underground drivers to wooden gates, it will be necessary to clad the gate bottom edge with metal to spread the load and to give something to attach the motor shoe. If you don't, the push-pull from the high torque will eventually split the wood.

Blank Installation Guide

Installation Hint:

When fitting Kit MyShark underground motors you will need a minimum of 65mm from your gate hinge point to the post.  Though soak-aways may be adequate, we recommend that you drain the motor case properly to lower lying land where possible.

All underground motors will operate underwater when new, but if left submerged, it is likely that water will eventually enter the motor and / or cable insulation will become porous. It is better to correctly drain the foundation cases from day one to protect your investment! Some additional fabrication/welding may be necessary to connect the drive shoe to your gates.

If you only have a single gate and you are not sure if you need a right-hand or left-hand kit? Don't worry - the Kit MyShark is ambidextrous!

For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.

Kit MyShark optional upgrades and accessories include:

    * gate stops (all of our gate motors require some form of resistance at the end of the opening & closing phase.)
    * underground exit loop (detects the presence of a vehicle and automatically opens the gate)
    * extra photocells
    * additional key fobs
    * intercom kit
    * extended range (external) aerial

Please Note: It is solely the responsibility of the recipient or the client / specifier – to ensure that the products described are suitable for purpose (see fitting guide under downloads) & comply with the relevant building regulations.

Got a question about this item?
comments powered by Disqus