APX 16 Heavy Duty & Weatherproof Keypad

Kit Contents

1 x APX 16 Heavy Duty Surface Keypad
1 x Instruction Sheet

Purchase options for APX 16 Heavy Duty & Weatherproof Keypad

Product Details Price Buy
APX 16 Heavy Duty keypad with Proximity Sensor Surface mounted heavy duty keypad with proximity sensor £150.30 Add to cart
APX 16 Heavy Duty Keypad Surface mounted,weatherproof heavy duty keypad £94.56 Add to cart
Proximity Cards for APX16 Proximity cards for APX16 - 10 pack £43.20 Add to cart

 

3 year warranty on this gate kit

This item has 1 year limited warranty. See the warranty FAQ page for more details.

This keypad is to be used on gate automation.

 

Whatever the elements have in store the new APX-16 waterproof keypad as been purposely designed to stand up to the challenge.

The new keypad is IP68 rated, which means it can be installed in the most extreme environments. Not only is the entire keypad protected from long periods of immersion under pressure, the units complete wiring system is also totally protected against the ingress of dust and contamination.

The APX-16 represents a new generation multiple input keypads, providing a standard 4-8 digit pin code with the option to include a proximity reader for up to 1200 users when specifying the AXP-16 PROX. The range supports pin only, card only or a combination of pin and card operation with two relay out-puts, lock and alarm.

The keypad will accept a 125KHZ EM proximity card and uses two zones. Zone one offers up to 1100 pin and card holders, whilst zone two allows up to 100 pin and card holders. The APX-16 design has a lock output of up to 2 amps and an alarm output of 20 amps, both relays are normally open or closed settable. The keypad will accept both 12-24v AC and DC power inputs.

Featuring backlit keys for easy visibility in low lit areas such as porches, under canopies or where there is poor street lighting, the APX-16 incorporates a 58mm wide super slimline design, which is both aesthetical pleasing and yet the robust zinc diecast and electroplated construction affords a reasonable measure of vandal protection.

 

 

  • Two relays operation, lock and alarm
  • Pulse mode, Toggle mode
  • Zone 1: up to 1100 Pin & Card holders
  • Zone 2: up to 100 Pin & Card holders
  • Standalone keypad card reader
  • Pin length: 4-8 digits
  • Card type: 125KHZ EM card
  • Block enrolment, can enrol 1500 consecutive cards within 10 seconds
  • Waterproof, conforms to IP68
  • Strong Zinc Alloy Electroplated anti-vandal case
  • 1200 uses, supports Card, PIN, Card & PIN
  • Backlight keypad
  • 12-24V AC/DC power input
  • APX-16/PROX suppied with ten proximity cards
  • Dimensions L 135 x W 58 x H 26mm
Got a question about this item?
comments powered by Disqus