- Double Gate Automation
- Single Gate Automation
- Sliding Gate Automation
- Intercom systems
- Safety Devices
- Gate Accessories
- MyGate Automation
- Proteco Automation
- Came Gate Automation
- FAAC Gate Automation
- Nice Automation
- Mhouse Automation
- BFT Automation
- ACI Farfisa
- BPT Intercoms
- Vehicle Access Control
- Home Automation
- AES Intercoms
MyGate Lime Key Fob
|1||x||MyGate Remote Control Key Fob|
|1||x||Pre Installed Battery|
Purchase options for MyGate Lime Key Fob
This item has 1 year limited warranty. See the warranty FAQ page for more details.
Compatible with all our kits apart from Came, FAAC, Nice, BFT and Mhouse.
MyKey transmitter for use on all of the MyGate and Proteco automation. e.g MyStrike, MyAster, MyHook, MyFlow, MyShark, Kit Aster, Kit Diamond, Kit Simply and Kit Blank. This key fob is the newer version of the Navy/Grey/Black key fobs.
Works with any GateMotors Q71/Q60/Q36/Q57 control units.
Easy to programme 3 button remote controller to operate up to 3 sets of gate/garage door systems. More than 16.000.000 possible codes, 24 bit. New codes can be generated using dip swiches.
Frequency: 433,92 Mhz
Dimensions: 45mm x 45mm x 13mm
Power supply (battery): 12Vdc - 23A
To give you an idea of the size of each of the remotes there is a picture below to help
Up to 99 remote controls can be added to each control panel, by following the instructions included with your kit.
Our keyfob transmitters can be used with gate systems from other manufacturers but you will need to add a receiver to your gate system in order to make the keyfobs compatible, see our gate system receivers section for more details.
Why are there three buttons on the remotes?
The key fob is a three channel remote control. Each channel can operate an independent system. For example, a property may have two gates; one entrance gate, one exit gate each operated with their own key fob remote. Instead of carrying around 2 key fobs in your pocket, you can operate both off the one key fob.
As each channel (button) of the remote is separate from the other, one button must be designated and used to operate the gate.
In addition, the key fob can be programmed to have one button to act as an Emergency Stop. This can be handy where an external Emergency Stop push button cannot or has not been fitted.
|Got a question about this item?|