- Double Gate Automation
- Single Gate Automation
- Sliding Gate Automation
- Intercom systems
- Safety Devices
- Gate Accessories
- MyGate Automation
- Proteco Automation
- Came Gate Automation
- FAAC Gate Automation
- Nice Automation
- Mhouse Automation
- BFT Automation
- ACI Farfisa
- BPT Intercoms
- Vehicle Access Control
- Home Automation
- AES Intercoms
Kit MyShark - Single Gate Opener, Underground
|1 x||MyShark motor|
|1 x||Underground chamber & brackets|
|2 x||Wired Safety Photocells|
|1 x||Electronic Control Unit (with in-built 30m aerial)|
|1 x||Remote Keyfob Controller|
|1 x||Override Keys (for power cuts)|
|1 x||Instruction Sheet|
Purchase options for Kit MyShark - Single Gate Opener, Underground
Optional additional accessories for Kit MyShark - Single Gate Opener, Underground
Emergency Stop Button - Twist Release
|This is an essential item for all gate automation systems and should be installed in a place visible to all users to allow the gates to be stopped in an emergency. When required the emergency stop must be accessible, recognisable and must work, reliably and safely.||£8.08|
2.0m - 25mm gate safety edge
|2.0m Length of 25mm profile gate safety edge.
All automatic gates & door systems installed in the UK should comply to BS-EN13241-1 & EN-138491-1 safety standards.
Profile & length options:- Safety Edges Options
Safety edge guide:- Download
Single Gate Stop Set
|1 x Back Stop and 1 x Mid Stop in a black powder coated finish for single gates. This gate system does not require external resistance but you are still able to have it in place.||£33.00|
MyGate Grey Key Fob
|Grey Remote Control Key Fob/Transmitter/Remote/. The gate system can support atleast 99 additional keyfobs.||£35.99|
|Standard surface mounted digipad/keypad. Allows users to get in or out of the gate without a key fob.||£125.40|
TPSL03 Outdoor Single Gang Bell Push
|Timeguard powerseal IP54 gate bell button push switch. Allows users to get in or out of the gate without a key fob.||£11.58|
Wireless Photocell Kit Upgrade
|Upgrade to wireless photocells with any of the above kits. (Only available in combination to a Gate Motors single gate kit).||£15.42|
|Safety+ Wireless Upgrade||This wireless upgrade includes 2x Wireless Photocells and 1x Emergency Stop Button.||£66.83|
MyShark Standard Electro Lock + Interface
|Horizontal Electro Lock (inc. interface) for MyShark Kit. Keeps the gate firmly shut/locked. Recommended for gates over 3m.||£91.74|
|Shark 180° Opening Angle Adaptor Kit||In-chamber mechanical adaptor for one motor.||£99.84|
Old style release key
|Old style release key for opening barrel.||£17.48|
New style release key
|New style release key for opening barrel.||£17.48|
EMIS120 GSM/Wifi Switch
|Smartphone (GSM) and Internet compatible gate opener switch (2-Outputs/Channels)||£159.00|
This kit has 3 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 3 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.
The GateMotors Kit MyShark underground electric gates kit is our premier product offering the most visually and aurally discreet gate automation system; will open outwards or inwards if required and up to 350Kg per leaf.
This kit is one of our most popular and is recommended for new and existing swing gates, up to 3 metres each, hung on posts or pillars. May be fitted to gates that open outwards or inwards. Opening angles up to 180° (angles between 90° - 180° requires optional adaptor) may be achieved dependent on gate hinge position.
The operators are non-reversible and therefore don’t need the inconvenience or expense of an additional electric lock to keep them closed.
If you don't want unsightly above ground stops, then this unit is ideal as it has in-built Opening Limit Stops & Closing Limit Stops which fit into the underground motor chambers to restrict the movement at the limits of travel.
The motor mechanics are buried within secure steel (choose from galvanised or stainless) underground foundation boxes so as not to compete with the aesthetics of your gates; all that can be seen is the steel lid covering the operator box and a very small unobtrusive operator attached to the bottom edge of the gate leaf.
As the motors are contained underground, environmental noise intrusion is minimal. Designed for an intensive use by using a die-casting structure made of quality aluminium, stainless steel, bronze and steel.
The fluid-grease lubrication system and the built-in thermal protection ensures a long-lasting working life in any weather conditions without the need for periodic maintenance.
The aerial within the kit is pre-installed and has a range of approx 30m.
Please note: the remote that you receive with this kit may be a different colour to what's shown in the image.
The new MyGate Q80 Control Board used with the MyGate MyShark: Includes an in-built obstacle detection feature for an extra level of safety. The gate will come to a stop and start reversing if it comes into contact with anything. This is a welcome extra safety precaution over and above safety photocells. This is an ideal feature if you have children or people going in, out and around the gate.
This sensitivity of this feature can be altered to help cope in windy situations where gusts of wind could be interpreted as an abstacle.
How Do I tell if I need a left Hand kit or right hand kit?
Example shown is a Left Hand gate arrangement.
Left and and Right hand gates are denoted by the type of bracket. The way to tell which handed kit you need is by looking from the back of the gates from the inside of the driveway with the property to your back – if the gate is hinged on the left, it’s a left handed gate. If the gate is hinged to the right, it is a right handed gate.
The Gatemotors Kit MyShark underground kit foundation box is installed beneath the gate at the foot of the hinge pillar.
The minimum distance between the vertical centre line of the hinges and the inner face of the pillar is 65mm. There must also be at least 65 mm between the lid of the foundation box and the bottom of the gate.
Remember if fitting underground drivers to wooden gates, it will be necessary to clad the gate bottom edge with metal to spread the load and to give something to attach the motor shoe. If you don't, the push-pull from the high torque will eventually split the wood.
When fitting Kit MyShark underground motors you will need a minimum of 65mm from your gate hinge point to the post. Though soak-aways may be adequate, we recommend that you drain the motor case properly to lower lying land where possible.
All underground motors will operate underwater when new, but if left submerged, it is likely that water will eventually enter the motor and / or cable insulation will become porous. It is better to correctly drain the foundation cases from day one to protect your investment! Some additional fabrication/welding may be necessary to connect the drive shoe to your gates.
If you only have a single gate and you are not sure if you need a right-hand or left-hand kit? Don't worry - the Kit MyShark is ambidextrous!
For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.
Kit MyShark optional upgrades and accessories include:
* gate stops (all of our gate motors require some form of resistance at the end of the opening & closing phase.)
* underground exit loop (detects the presence of a vehicle and automatically opens the gate)
* extra photocells
* additional key fobs
* intercom kit
* extended range (external) aerial
Please Note: It is solely the responsibility of the recipient or the client / specifier – to ensure that the products described are suitable for purpose (see fitting guide under downloads) & comply with the relevant building regulations.
|Got a question about this item?|