- Double Gate Automation
- Single Gate Automation
- Sliding Gate Automation
- Intercom systems
- Safety Devices
- Gate Accessories
- MyGate Automation
- Proteco Automation
- Came Gate Automation
- FAAC Gate Automation
- Nice Automation
- BFT Automation
- ACI Farfisa
- BPT Intercoms
- Vehicle Access Control
- Home Automation
- AES Intercoms
Kit MyFlow - Single Wheeled Gate Automation Kit
|1 x||MyFlow Wheeled Operator|
|2 x||Wired Safety Photocells|
|1 x||Electronic Control Unit (with in-built 30m aerial)|
|1 x||Vertical Electrolock & keep plate|
|1 x||Remote Keyfob Controller|
|2 x||Brackets & fittings|
|1 x||Instruction Sheet|
|Black version kits also include :
|1 x||Flashing blinker light
|1 x||Key switch|
Purchase options for Kit MyFlow - Single Wheeled Gate Automation Kit
Optional additional accessories for Kit MyFlow - Single Wheeled Gate Automation Kit
Emergency Stop Button - Twist Release
|This is an essential item for all gate automation systems and should be installed in a place visible to all users to allow the gates to be stopped in an emergency. When required the emergency stop must be accessible, recognisable and must work, reliably and safely.||£8.08|
2.0m - 25mm gate safety edge
|2.0m Length of 25mm profile gate safety edge.
All automatic gates & door systems installed in the UK should comply to BS-EN13241-1 & EN-138491-1 safety standards.
Profile & length options:- Safety Edges Options
Safety edge guide:- Download
Single Gate Stop Set
|1 x Back Stop and 1 x Mid Stop in a black powder coated finish for single gates. This gate system requires external resistance.||£33.00|
MyGate Grey Key Fob
|Additional Grey Remote Control Key Fob/Transmitter/Remote/. This gate system requires external resistance.||£35.99|
|Standard surface mounted digipad/keypad. Allows users to get in or out of the gate without a key fob.||£125.40|
Wireless Photocell Kit Upgrade
|Upgrade to wireless photocells with any of the above kits. (Only available in combination to a Gate Motors single gate kit).||£15.42|
|Safety+ Wireless Upgrade||This wireless upgrade includes 2x Wireless Photocells and 1x Emergency Stop Button.||£66.83|
TPSL03 Outdoor Single Gang Bell Push
|Timeguard powerseal IP54 gate bell button push switch. Allows users to get in or out of the gate without a key fob.||£11.58|
EMIS120 GSM/Wifi Switch
|Smartphone (GSM) and Internet compatible gate opener switch (2-Outputs/Channels)||£159.00|
This kit has 3 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 3 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.
The Kit MyFlow electromechanical wheel operator kits are cost effective method of gate automation and are ideal where long light gates are in place and will swing as far as 270° but is only suitable for inward opening gates.
This system is designed for large gates and also works well on gates with a sloping drive. It also opens far faster than traditional systems. The way the gate is hung also normally makes no difference to this kit.
Our operators are designed for intensive use; they are constructed of quality die-cast aluminium with stainless steel, bronze and steel parts.
The fluid-grease lubrication system, polyester powder-paint coating, self-lubricating worm gear and built-in thermal protection system ensure quiet operation and a long working life in all weather conditions, without the need for periodic maintenance.
The aerial within the kit is pre-installed and has a range of approx 30m.
The physical dimensions of the motor can be found on page 3 of the Installation guide which is available from the Downloads section in the right hand corner of this page.
Please note: the remotes that you receive with this kit may be a different colour to what's shown in the image.
How Do I tell if I need a left Hand kit or right hand kit?
Example shown is a Left Hand gate arrangement.
Left and and Right hand gates are denoted by the type of bracket. The way to tell which handed kit you need is by looking from the back of the gates from the inside of the driveway with the property to your back – if the gate is hinged on the left, it’s a left handed gate. If the gate is hinged to the right, it is a right handed gate.
The illustration show the gates closed and the operators fixed to the internal (property side) of the gate
If you only have a single gate and you are not sure if you need a right-hand or left-hand kit?
The motor is usually mounted on the inside of the property for security; so view the gates from inside the property looking outwards (the gates will normally, but not always, swing toward you).
If the hinge appears on the left, you need a left-hand kit; if it's on the right you need a right-hand kit.
For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.
Kit MyFlow optional upgrades and accessories include:
* gate stops (all of our gate motors require some form of resistance at the end of the opening & closing phase.)
* underground exit loop (detects the presence of a vehicle and automatically opens the gate)
* extra photocells
* additional key fobs
* intercom kit
* extended range (external) aerial
Please Note: It is solely the responsibility of the recipient or the client / specifier – to ensure that the products described are suitable for purpose (see fitting guide under downloads) & comply with the relevant building regulations.
|Got a question about this item?|