Call us on: 01202 717191

FAAC XP20 D Wired Safety Photocells

Product Details Price Buy

FAAC XP20 D Safety Photocells
XP20 Wired Adjustable Safety Photocells
£78.50+vat

£94.20 inc.vat

FAAC XP20B D Safety Photocells
XP20B D Wired Adjustable Safety Photocells
£89.90+vat

£107.88 inc.vat

FAAC XP20W D Wireless Safety Photocells
XP20W D Wireless Adjustable Safety Photocells
£103.00+vat

£123.60 inc.vat

Kit Contents

1 x Pair XP20 D Adjustable Safety Photocells

 

Product Overview 

The new XP20 D adjustable photocells comprise a transmitter and a modulated infra-red receiver with a range of up to 20m. The obstruction of the light beam causes the receiver status to change.

Simplicity & versatility of installation

The new XP20 D photocells, both wall-mounted and column-mounted, allow the mechanical reduction of the beam along the horizontal axis of 180° (-90°+90°) and feature a vertical optical self-alignment function which is particularly useful when the area to protect is not entirely flat.

Perfect in any architectural context

Extremely compact size: 41x130x42mm. Possibility of cable inlet both from the rear and from the underside of the casing (16mm) and of column-mounting.

Superior Protection

Mould seal on the casing, so there is no risk of it being removed or fitted incorrectly, thereby ensuring the IP54 protection class.

Accurate & Reliable Adjustment

The photocell is housed in a swivel support fitted with a high-performance lens designed to optimise the efficiency of the beam in any direction. The swivel support is locked in the desired position thanks to a hard-wearing quick-fit swivel lock (which can be removed with a srewdriver where necessary).

 

TECHNICAL SPECIFICATIONS        XP20 D                                        XP20B D XP20W D
Power supply voltage

24V⎓ / 24V~

via BUS 2easy, two 24V non-polarized wires ⎓ Rx: 12-24V~ / ⎓ or battery-operated (3 VcR2 - not included)
Nominal range 20m 20m 20m
Type of installation wall-mounted wall-mounted wall-mounted
Dimensions (LxHxD) 41 x 130 x 42mm 41 x 130 x 42mm 41 x 130 x 42mm
Horizontal adjustment angle -90°+90° -90°+90° -90°+90°
Self-alignment angle ±7° (20m) ±13.5° (5m) ±7° (20m) ±13.5° (5m)

±7° (20m) ±13.5°(5m)

Obstacle detection time 13ms 20ms 40ms
Absorbed current Rx(30mA) + Tx(20mA) Rx(10mA) + Tx(10mA) Rx(30mA) + Tx(40mA battery-operated or 5mA at 24V ⎓)
Protection class IP54 IP54 IP54
Max contact capacity  60VA/24W    
Operating room temperature -20°C ÷ 55°C   -20°C ÷ 55°C   -20°C ÷ 55°C 
    Possibilty of installing up to 16 pairs of photocells on the same system   Possibilty of installing up to 4 pairs of photocells on the same system 

 

Need more information or advice on this product? Call our sales support team on 01202 717 191 or drop us a message on our live chat platform.

 

Kit Contents

1 x Pair XP20 D Adjustable Safety Photocells
Proteco Price Match Promise Order before 3pm Why buy from us? Gate Safe

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.