- Double Gate Automation
- Single Gate Automation
- Sliding Gate Automation
- Intercom systems
- Safety Devices
- Gate Accessories
- MyGate Automation
- Proteco Automation
- Came Gate Automation
- FAAC Gate Automation
- Nice Automation
- Mhouse Automation
- BFT Automation
- ACI Farfisa
- BPT Intercoms
- Vehicle Access Control
- Home Automation
- AES Intercoms
Kit MyHook - Articulated Twin Swing Gate Automation Kit
|2 x||Kit MyHook motors|
|2 x||Folding arm & fixing brackets|
|2 x||Wired Safety Photocells|
|1 x||Electronic Control Unit (with in-built 30m aerial) Housed in the Left Hand Motor
|2 x||Remote Keyfob Controllers|
|1 x||Override Key (for power cuts)|
|4 x||Brackets with fixings & fittings|
|1 x||Instruction Sheet|
Purchase options for Kit MyHook - Articulated Twin Swing Gate Automation Kit
Optional additional accessories for Kit MyHook - Articulated Twin Swing Gate Automation Kit
MyGate Grey Key Fob
|Additional Grey Remote Control Key Fob/Transmitter/Remote. The gate system can support atleast 99 additional keyfobs.||£35.99|
Additional MyGate Wired Photocells
|Improve the level of safety & protection on your gate system by adding an additional set of safety photocells.||£43.02|
Emergency Stop Button - Twist Release
|This is an essential item for all gate automation systems and should be installed in a place visible to all users to allow the gates to be stopped in an emergency. When required the emergency stop must be accessible, recognisable and must work, reliably and safely.||£8.08|
2.0m - 25mm gate safety edge
|2.0m Length of 25mm profile gate safety edge.
All automatic gates & door systems installed in the UK should comply to BS-EN13241-1 & EN-138491-1 safety standards.
Profile & length options:- Safety Edges Options
Safety edge guide:- Download
Double Gate Stops Set
|2 x Back stop and 1 x Mid stop in a black powder coated finish for double gates. This gate system does not require external resistance but can work with it.||£46.20|
|Single Extended Arm||Swap these for the standard arms that are supplied with the kit to extend the reach of the articulated arm. Note : For a double kit 2 arms are required||£36.00|
|MyGate Blank Release Key||Additional Release Key, to release the gearing in the event of a power failure. A key is already included with each motor in the kit.||£8.58|
EMIS120 GSM/Wifi Switch
|Smartphone (GSM) and Internet compatible gate opener switch (2-Outputs/Channels)||£159.00|
This kit has 3 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 3 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.
The GateMotors Kit MyHook articulated arm kits are quick and easy to install and ideal for DIY installation or gates installed between brick or stone pillars with leaves up to two metres each, especially where the GateMotors Kit MyAster or Kit Diamond can’t be fitted.
It can be fitted to gates that open either outward or inward without the need for special modification.
Opening angles of up-to 130° may be achieved dependent on gate hinge position. The operators are non-reversible and therefore don’t need the inconvenience or expense of an additional electric lock to keep them closed.
Suitable for big dimensioned pillars with maximum distance between the hinges' axis and the gate's corner of 30 cm; gate openings up to 4m (2m per leaf) and up to 250Kg per leaf. This will give you opening angles up-to 130° if installation instructions are followed.
Easy installation, with adjustable accessories and brackets. Incorporated release key. Pivoted arm transmission adjustable and anti-shearing safety. The perfect integration of its components ensures the greatest quietness.
It is designed for intensive use by using a die-casting structure made of quality aluminium, stainless steel, bronze and steel. The fluid-grease lubrication system and the built-in thermal protection ensure a long-lasting working life in any weather conditions without the need for periodic maintenance.
The aerial within the kit is pre-installed and has a range of approx 30m.
These diagrams show the gates closed and the operators fixed to the inside edge of each pillar (inside the property). The plan view diagrams below show the operator and gate closed and open. The dimension A, between the pillar mounting face of the operator and the centre line of the gate, can be up to 300mm. Dimension B is recommended to be 30mm.
When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.
This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.
If you only have a single gate and you are not sure if you need a right-hand or left-hand kit?
The motor is usually mounted on the inside of the property for security; so view the gates from inside the property looking outwards (the gates will normally, but not always, swing toward you).
If the hinge appears on the left, you need a left-hand kit; if it's on the right you need a right-hand kit.
For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.
Please note: the remotes that you receive with this kit may be a different colour to what's shown in the image.
Kit MyHook optional upgrades and accessories include:
* gate stops (all of our gate motors require some form of resistance at the end of the opening & closing phase.)
* underground exit loop (detects the presence of a vehicle and automatically opens the gate)
* extra photocells
* additional key fobs
* intercom kit
* extended range (external) aerial
Please Note: It is solely the responsibility of the recipient or the client / specifier – to ensure that the products described are suitable for purpose (see fitting guide under downloads) & comply with the relevant building regulations.
The fixings & fittings supplied with this kit include the brackets and the fixings for mounting the motor onto the bracket, we do not however include the fixings to mount the bracket onto the post as this will vary from one installation to another and you may even be welding the bracket to the post.
Articulated Arm Length
The standard arms that are supplied with the kit have the dimensions shown below :
The reach of the articulated arms by be lengthened buy purchasing the optional extended arms, with the extended arms you will be able to acheive a dimension of A = 400 mm maximum & B = not less than 50 mm and not more than 100 mm, these are available above and provide a greater reach, as detailed below :
|Got a question about this item?|