For sliding gates weighing up to 1500kg (RunKit 1500), 1800 kg (RunKit 1800) and up to 2500 kg (RunKit 2500). Electromechanical gear motor with Nice BlueBUS technology. The different RunKits shown are available in a 'P' version as well as the standard. The standard versions come with an electromechnical limit switch and the 'P' version comes with an inductive limit switch. Limit switches allow you the flexibility of setting limits of travel on your motors.
Simple to install: the BlueBUS system enables connections by means of just two wires between the control unit and up to 15 control safety and signalling devices.
Practical: the control unit and PS124 buffer battery (optional accessory) can be connected by means of a simple connector and can be housed directly inside the motor. This is ONLY compatible with the 24v RunKit 1500.
Intelligent: thanks to the obstacle detection system and automatic programming of the working times (24v RunKit 1500 ONLY). Obstacle detection means that if someone or something comes into contact with the gate while it's in motion, it will stop and back off.
Safe: the acceleration settings (at the start of the manoeuvre) and the deceleration settings (at the end of the manoeuvre) are precise and reliable.
The temperature sensor: Run is able to manage force, adapting it to the different climatic and environmental conditions, while adapting the thermal cut-out protection and intensity of self-ventilation, depending on the temperature reading.
A master/slave selection also automatically synchronises 2 motors, enabling the automation of sliding gates with two opposing leafs.
Practical and functional: the control unit and inverter, housed inside Run, can be simply connected by means of the practical connector guide.
Very quiet: gear motor on bearings.