Call us on: 01202 717 191

Nice RobusKit 400 / 600 / 1000 - Sliding Kit

Image for Nice RobusKit 400 / 600 / 1000 - Sliding Kit
Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
RobusKit 400
24v
400 kg
8m
Sliding
£407.91+vat
RRP £652.64 Save 25%

£489.49 inc.vat
RobusKit 1, 600
24v
600kg
8m
Sliding
£378.40+vat
RRP £605.44 Save 25%

£454.08 inc.vat
RobusKit 1, 600 with 4m ROA7 Rack
24v
600kg
8m
Sliding
£520.00+vat
RRP £1,192.80 Save 48%

£624.00 inc.vat
Nice RobusKit 3, 1000
24v
1000kg
12m
Sliding
£494.21+vat
RRP £790.74 Save 25%

£593.05 inc.vat
Nice RobusKit 3, 1000 with 4m ROA7 Rack
24v
1000kg
12m
Sliding
£590.00+vat
RRP £1,370.47 Save 48%

£708.00 inc.vat

Kit Contents

1 x Motor (with Built in Control Board)
2 x Wired Safety Photocells
1 x Radio Remote
1 x Manual Release Key
1 x Instruction Manual

For sliding gates complete with Nice BlueBUS technology, making it possible to power and control a maximum of seven couples of photocells from the Moonbus series using two wires only.

Gear motor characteristics: User-friendly: the BlueBUS system enables users to connect the photocell couples and control unit using just two wires.

Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.


Advanced: the speed, strength and pause can all be adjusted.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Motor absorption is monitored during movement, self-diagnosis by means of a flashing light. Acceleration and deceleration can be adjusted.


Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.


Very quiet: gear motor on bearings.

 

 

Please note: motor may come in blue or black.

Products bought with Nice RobusKit 400 / 600 / 1000 - Sliding Kit

Kit Contents

1 x Motor (with Built in Control Board)
2 x Wired Safety Photocells
1 x Radio Remote
1 x Manual Release Key
1 x Instruction Manual

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.