Call us on: 01202 717 191

BFT DEIMOS BT - Sliding Gate Kit

Image for BFT DEIMOS BT - Sliding Gate Kit

Kit Contents

1 x Motor (with Built in Control Board)
2 x Wired Safety Photocells
2 x Radio Remote
1 x Safety Blinker Light (with Built in Aerial)
4 x Metre length of Rack
1 x Instruction Manual
Product Volt Weight
per leaf
per leaf
per leaf
Type Price Buy
BFT Deimos-Ultra-600 Kit
Sliding Gate Kit
RRP £1,243.24 Save 32%

£840.00 inc.vat
BFT Deimos-A BT400 Kit
400 kg
Sliding Gate Kit
RRP £1,072.20 Save 32%

£732.00 inc.vat


Range of residential operators, extremely simple to install and totally safe to use thanks to their full compliance with current European standards.

Available in 24v version. Can take a sliding gate up to a maximum weight of 500kg.



Technical Specifications

Control unit QSC-D MA
Power supply 24v
Power input 70W
Gate speed 12m/min
Type of limit switch Electromechanical
Pinion module 4 (Z14)
Pinion rotation speed 79rpm
Slowdown Yes
Locking Mechanical
Release Knob with triangular key
Frequency of use Intensive
Enviromental conditions  
Actuator weight 7kg

Optional additional accessories for BFT DEIMOS BT - Sliding Gate Kit

Gate Automation Wizard

Optional Accessories

  1. EMIS120 GSM/Wifi Switch

    EMIS120 GSM/Wifi Switch

    from £152.31
  2. ASO 225 TK 25mm Safety Edge - 2000mm

    ASO 225 TK 25mm Safety Edge - 2000mm

    from £115.00
  3. BFT DESME A15 Safety Photocells

    BFT DESME A15 Safety Photocells

    from £54.00
  4. 1 x BFT MITTO 2 Transmitter

    1 x BFT MITTO 2 Transmitter

    from £31.50
  5. Emergency Stop Button - Twist Release

    Emergency Stop Button - Twist Release

    from £6.73
  6. BFT CP Sliding Gate Rack

    BFT CP Sliding Gate Rack

    from £21.00
  7. BFT CVZ Sliding Gate Rack

    BFT CVZ Sliding Gate Rack

    from £24.00
  8. BFT CVZ-S Sliding Gate Rack

    BFT CVZ-S Sliding Gate Rack

    from £25.00
  9. BFT CFZ Sliding Gate Rack

    BFT CFZ Sliding Gate Rack

    from £30.00
  10. BFT CFZ6 Sliding Gate Rack

    BFT CFZ6 Sliding Gate Rack

    from £38.00

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.