For swing gates with leafs up to 5 m, underground installation.
Irreversible electromechanical gear motor, also available in 24 Vdc versions with magnetic encoder and mechanical stop.
Big-Metro Box chamfered foundation boxes with mechanical stop on opening:
• in stainless steel (BMBOXI), ideal for use in extreme conditions,
• with cataphoresis paint finish (BMBOX), highly resistant to corrosion.
Cataphoresis is a surface treatment coating that can give high resistant to corrosion at the steel products and is characterized by an additional coating of a uniform epoxy or acrylic resin on the surface of the item, ensuring long outstanding protection against weather attacks, also allowing better adhesion of paint finish. The acrylic resin is different from the epoxy because it can remain in direct contact with bad weather conditions while maintaining the technical characteristics.
This treatment ensures a durable rust protection.
Maximum freedom of choice: release from inside or outside, two key or lever operated models, freely combinable and easy to operate with just one hand.
Simple to use: mechanical stop system on closure. Standard opening to 110°, or optional 360°.
24 Vdc version with magnetic encoder.
Ideal for intensive use, compatible with the control unit Moonclever MC824H:
• simple programming via a single key;
• self-learning of travel limits on opening and closing;
• self-diagnostics of faults;
• programming of pause time;
• pass door;
• deceleration on opening and closing;
• dual technology obstacle detection;
• operation in the event of a power failure with optional rechargeable batteries (PS324);
• provision for connection of latest generation sensitive edges.
|Max leaf gate upto||5 m|
|Type of Motor||Underground installation|
|Solar Power Option||Yes|
|Work Cycle (cycles/hour)||45|
When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.
This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.
For gates wider than 3m we also suggest using an electro-lock to ensure that there is not play in the gates when closed.
Remember if fitting underground drivers to wooden gates, it will be necessary to clad the gate bottom edge with metal to spread the load and to give something to attach the motor shoe. If you don't, the push-pull from the high torque will eventually split the wood.
All underground motors will operate underwater when new, but if left submerged, it is likely that water will eventually enter the motor and / or cable insulation will become porous. It is better to correctly drain the foundation cases from day one to protect your investment! Some additional fabrication/welding may be necessary to connect the drive shoe to your gates.
Optional upgrades and accessories include:
* underground exit loop (detects the presence of a vehicle and automatically opens the gate)
* extra photocells
* additional key fobs
* intercom kit