Call us on: 01202 717 191

LZR i100 i110 Laser Safety Sensor

Image for LZR i100 i110 Laser Safety Sensor

Kit Contents

1 x LZR - i100 or i110 Laser Safety Sensor
1 x Instruction Manual
Product Details Price Buy
LZR - i110 Laser Safety Sensor
Laser detection sensor with a maximum detection range of 5m x 5m. Ensures your gates are protected all over

£1,008.00 inc.vat
LZR - i100 Laser Safety Sensor
Laser detection sensor with a maximum detection range of 10m x 10m. Ensures your gates are protected all over

£1,248.00 inc.vat

The LZR safety sensors are certified to meet solution E: EN12453 and work according to the principle of time of flight. The high precision technology ensures optimal safety. A dynamic orientation of the laser beams on 4 planes offers more safety around the gate threshold and its proximity.

Please note: to achieve Solution E: EN12453 for swing gates, four laser safety units would be required.

Click here to watch an introductory video of the LZR.




  • High performance safety solution for industrial doors certified CAT.2 according to EN 954-1, PL "c" according to EN ISO 13849-1 and Type E according to EN 12453.
  • High level of safety with a complete three-dimensional detection in front of the door.
  • Replaces the current solutions such as contact edges, light beams and lightgrids.
  • In addition to the safety, the LZR® enables an opening for pedestrians.
  • Safety at the opening and the closing of the door thanks to 2 separate detection areas.
  • Easy installation and good opportunity for the retrofit.



  • Maximal detection range : 5 m × 5 m for i110 and 10 m × 10 m for i100.
  • Variable depth of plane (1 m max.) according to the installation height.
  • Safety at the opening and the closing of the door thanks to 2 separate detection areas.
  • Possibility to create 2 virtual push buttons to open the door.
  • Detection of small objects.*

* up to a few centimeters depending on the application.




  • Easy setting of the detection zone with 3 visible LASER beams.
  • Automatic door dimensions teach-in.
  • Setting with the universal remote control.
  • Cable of 10 m provided.
  • Easy to install and a good opportunity for the retrofit.
  • Overhead mounting position avoids collision damages.



Product thumbnail

Product thumbnail

Product thumbnail

Product thumbnail

Product thumbnail


For i100 Only:

Product thumbnail

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.