Call us on: 01202 717 191

ASO Sentir Edge 245 TK Safety Edge 45Mm Profile 8.2

Image for ASO Sentir Edge 245 TK Safety Edge 45Mm Profile 8.2

Kit Contents

1 x Length of gate edge safety in 45mm profile, pre-cut
Product Details Price Buy
ASO 245 TK 45mm safety edge - 1000mm
1000mm x 45mm GE Series - sentir edge 245 TK
£98.00+vat

£117.60 inc.vat
ASO 245 TK 45mm safety edge - 1500mm
1500mm x 45mm GE Series - sentir edge 245 TK
£109.00+vat

£130.80 inc.vat
ASO 245 TK 45mm safety edge - 2000mm
2000mm x 45mm GE Series - sentir edge 245 TK
£124.00+vat

£148.80 inc.vat
ASO 245 TK 45mm safety edge - 2500mm
2500mm x 45mm GE Series - sentir edge 245 TK
£142.00+vat

£170.40 inc.vat
ASO 245 TK 45mm safety edge - 3000mm
3000mm x 45mm GE Series - sentir edge 245 TK
£165.00+vat

£198.00 inc.vat
ASO 245 TK 45mm safety edge - 3500mm
3500mm x 45mm GE Series - sentir edge 245 TK
£180.00+vat

£216.00 inc.vat
ASO 245 TK 45mm safety edge - 4000mm
4000mm x 45mm GE Series - sentir edge 245 TK
£190.00+vat

£228.00 inc.vat
ASO 245 TK 45mm safety edge - 4500mm
4500mm x 45mm GE Series - sentir edge 245 TK
£220.00+vat

£264.00 inc.vat
ASO 245 TK 45mm safety edge - 5000mm
5000mm x 45mm GE Series - sentir edge 245 TK
£230.00+vat

£276.00 inc.vat
ASO 245 TK 45mm safety edge - 6000mm
6000mm x 45mm GE Series - sentir edge 245 TK
£255.00+vat

£306.00 inc.vat

Please note we cannot offer a next day delivery on this item.

 

For use on sliding gates up to 7m

All automatic gates & door systems installed in the UK should comply to BS-EN13241-1 & EN-138491-1 safety standards. ASO safety solutions are Europe’s market leading manufacturer of resistive safety edges and inductive transmitting systems for gates & door systems.


See more information below on the functionality of ASO safety systems and how they comply to the law with examples
of where and how to fit them to automatic gates & doors.

(This information is provided as an introductory guide only. Each individual gate or door installation is unique and a full risk assessment should always be carried out first before any work is undertaken.)

gate safety edge profile

The ingenius design of an ASO Safety Edge comprises of a fully extruded rubber profile with an integrated switching chamber. The switching chamber consists of two conductive rubber surfaces separated by a 4mm void, each surface has a connection wire extruded through its entire length.


A pre-formed plug containing an 8.2kΩ resistor is glued in to one end of the switching chamber penetrating both wires. At the other end a pre-formed wiring plug is glued in to place, again penetrating the chamber wires. This enable monitoring of the entire safety edge.


Finally an end cap is applied at each side to finish the construction of the safety edge. When mounted vertically,
the lower end cap has a water drainage seal which needs to be removed to prevent moisture build up. When mounted horizontally, it is recommended that both of the end cap’s seals are removed to ensure no moisture build up.


When the safety edge is connected to its control electronics the system reads the 8.2kΩ resistance. When the safety edge is pressed the two conductive rubber surfaces come together and create a short between them, this cuts the 8.2kΩ signal being monitored by the control electronics.


The control electronics then output a N/C contact or voltage signal (depending on model) to the door or gate control panel.

sliding gate edge safety

Features and Benefits

• Safety edge continuously monitored and tested by electronics.
• Very fast switching time due to fully sealed chamber design.
• One piece construction, no additional chambers or micro switches to install.
• Safety edge sensitive along its entire length.
• EPDM material, highly resistive to environmental corrosion and physical damage.
• Pre-assembled.
• Made to exact length required.
• Safety edge’s certified by a notified body (TUV Nord) to EN1760-2.
• Wide selection of profile sizes to suit any application.

gate edge profile GE 245 TK

Profile: 25mm + 9mm Aluminium Backing

Mounting: T-Foot

W: 25mm H: 45mm

Material: EPDM

Aluminium Backing Exposed

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.