Call us on: 01202 717 191

Nice Tub - Sliding Gate Motor - Industrial / Commercial

Image for Nice Tub - Sliding Gate Motor - Industrial / Commercial

Kit Contents

1 x Motor
1 x Instruction Manual
Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
Nice Tub Sliding Gate Motor Only
400v
3500kg
30m
Sliding
£1,420.00+vat
RRP £3,266.76 Save 48%

£1,704.00 inc.vat

For sliding gates weighing up to 3500 kg. Ideal for industrial use. Irreversible electromechanical 400 Vac gear motor with built-in Mindy A500 control unit.

Powerful: 550 W absorbed output and a peak thrust of over 400 Nm.

Functionality and safety: programmable, electronic brake which prevents gate inertia; self-ventilated motor to increase the working cycles; optional PIU card to increase the basic functions; possibility of slowdown. Maximum durability and silence: bronze and metal gears.

Advanced: Tub meets all requirements in terms of control, thanks to the functions which can be selected by means of dipswitches.

Practical: the lever release enables safe and simple operation.

 

Optional additional accessories for Nice Tub - Sliding Gate Motor - Industrial / Commercial

Gate Automation Wizard

Optional Accessories

  1. ASO SKL 10mm safety edge - 1000mm

    ASO SKL 10mm safety edge - 1000mm

    from £90.00
  2. EMIS120 GSM/Wifi Switch

    EMIS120 GSM/Wifi Switch

    from £152.31
  3. ASO 225 TK 25mm Safety Edge - 2000mm

    ASO 225 TK 25mm Safety Edge - 2000mm

    from £115.00
  4. Nice ROA81 Sliding Gate Rack

    Nice ROA81 Sliding Gate Rack

    from £28.00
  5. Nice FT210 Wireless Photocells + Battery Kit

    Nice FT210 Wireless Photocells + Battery Kit

    from £108.84
  6. Nice Inti 2 Channel Remote in Red

    Nice Inti 2 Channel Remote in Red

    from £20.83
  7. Nice Inti 2 Channel Remote in Yellow

    Nice Inti 2 Channel Remote in Yellow

    from £20.83
  8. Nice Inti 2 Channel Remote in Lilac

    Nice Inti 2 Channel Remote in Lilac

    from £20.83
  9. Nice Inti 2 Channel Remote in Green

    Nice Inti 2 Channel Remote in Green

    from £20.83
  10. Nice Inti 2 Channel Remote in Blue

    Nice Inti 2 Channel Remote in Blue

    from £20.83
  11. Nice Inti 2 Channel Remote in Black

    Nice Inti 2 Channel Remote in Black

    from £20.83

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.