Call us on: 01202 717 191

Videx 8000 Series Surface Mounted Audio Kit with Push Button

Image for Videx 8000 Series Surface Mounted Audio Kit with Push Button

Kit Contents

1 x Surface mount box
1 x 8000 series speaker
1 x Covering frame
1 x 12v AC Transformer
1 x Smartphone
Product Details Price Buy
Videx Telephone Interface Unit
The Art380 is a self contained telephone interface module for use on an analogue telephone line. Its primary function is to enable a user to communicate with a telephone line and a door entry point (or points) for the same telephone handset

£233.80 inc.vat
Additional Videx Handset
Handset for videx 8000 series

£28.67 inc.vat
Videx 8000 Series Surface Audio Kit
Videx 8000 Series Surface Mounted Audio Kit with Push

£89.17 inc.vat


  • Modules available in mirror finish stainless steel or matt aluminum.
  • Frames available in aluminum or black finish
  • Module frames from 1 - 9 available in both surface and flush
  • Camera's include 13° angle adjustment and support both balanced and coax video (mono or colour)
  • Back lit name plates for button identification
  • A range of 8000 series audio and video kits are also available
  • Can use 5 wire cable up to 200m in length from the outside caller unit to the handset. Cable used will differ depending on which length you have (see installation manual)

If you require more caller buttons on the unit then give us a call and we will be able to get hold of what you need. You can have up to 12 caller buttons on one Videx 8000 audio intercom unit.


The 8000 Series modular system has been developed to replace the popular 800 series and is fully backward compatible. It includes many new features which include improved environmental protection and updated aesthetics.

Optional additional accessories for Videx 8000 Series Surface Mounted Audio Kit with Push Button

Gate Automation Wizard

Optional Accessories

  1. Videx Telephone Interface Unit

    Videx Telephone Interface Unit

    from £194.83
  2. Additional Videx Handset

    Additional Videx Handset

    from £23.89

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.