Call us on: 01202 717 191

BPT Lithos To Perla Audio Intercom Kit

Product Details Price Buy
Audio, Lithos to Perla 2-Way
2 Buttons / 2 Receivers (Keypad not included)

£475.80 inc.vat
Audio, Lithos to Perla 3-Way
3 Buttons / 3 Receivers (Keypad not included)

£569.94 inc.vat
Audio, Lithos to Perla 4-Way
4 Buttons / 4 Receivers (Keypad not included)

£646.97 inc.vat
Audio, Lithos to Perla 1-Way
1 Button / 1 Receiver (Keypad not included)

£397.08 inc.vat

Kit Contents

1 x Lithos entry panel
1 x Required buttons
1 x Perla receiver
1 x VAS/101 power supply
1 x R/1 relay

Complete Audio Intercom kit with Lithos entry panel and Perla Audio receiver.

  • Lithos entry panel
  • Required buttons
  • Perla receiver(s)
  • VAS/101 power supply
  • R/1 relay

Lithos Panel

Lithos is an entry panel created by BPT for the X1 two-wire system. Compact and ultraslim (protruding just 30 mm from the wall), Lithos will blend perfectly into any setting, thanks to its soft lines and elegant brushed stainless steel finish. Lithos can be fitted with single or double push buttons for single-family or two family systems, and features the intercom function as standard without the need for supplementary power supply*.In addition, it can be used to create systems designed to handle up to four calls. Lithos can be installed wall-mounted or recessed.
*Dependent on handset type

• Brushed stailess steel faceplate
• IP54 rated
• Single or double push buttons

Perla Receiver

The Perla audio receiver installs easily and quickly, thanks to its compact size and adjustable mounting bracket included in the package, which can be used with a standard single gang back box if required. Please note if a back box is not used,suitable provision for excess cable must be made on the mounting surface.

• Fusion black or ice white colours
• Full duplex hands-free
• Door release

Kit Contents

1 x Lithos entry panel
1 x Required buttons
1 x Perla receiver
1 x VAS/101 power supply
1 x R/1 relay

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.