Call us on: 01202 717 191

Videx GSM Intercom with Push Button and Keypad - Surface Mounted

Product Details Price Buy
Videx GSM Intercom 1 Button Surface + Keypad
Single caller GSM unit with a surface mount frame and keypad (4K1S/GSM/CL)
£671.57+vat

£805.88 inc.vat
Videx GSM Intercom 2 Button Surface + Keypad
Two caller GSM unit with a surface mount frame with keypad (4K2S/GSM/CL)
£784.20+vat

£941.04 inc.vat

Kit Contents

1 x External Audio Panel with selected number of push buttons
1 x GSM interface module (mounted to panel)
1 x Digicode Keypad
1 x Surface back box
1 x Antenna
1 x 12-14v 2A DC Power Supply
1 x Instruction Sheet

 

With GSM comes freedom - Answer calls from your door or gate from any telephone number including your mobile so you never have to miss that important caller.

GSM door entry system's employ mobile phone technology to operate automatic gates, doors and remote site installations.

Based on the 4000 Series entry panel design, the GSM amplifier is totally self contained and only requires an external power supply, antenna and standard size SIM card (not supplied by Videx).

These systems can include multiple doors, coded access, proximity access and bio-access features.

Available from a single button up to a 50 button system or a digtial door panel which will call up to 500 apartments, all can have up to 1000 dial to open numbers (up to 2000 on the digital panel), this allows a user or users to call the entry panel and activate the lock output relay at no charge to the caller.

Both the functional and digital GSM units can be programmed with 4 telephone numbers per button, allowing the system to divert a call if a number is busy or not answered. Push to exit and auxiliary inputs / outputs along with dry contact timed lock output relay are standard.

Features Include:

  • Up to 50 call buttons
  • 4 telephone numbers per call button (1 primary and 3 diverts)
  • 1000 dial to open numbers
  • 1000 user integrated proximity access
  • Voice annunciation
  • 4 Call progress LED's
  • Programming by SMS or PC software
  • Push to exit input
  • 2 auxiliary inputs
  • 2 auxiliary outputs
  • Dry contact relay
  • Micro USB connection
  • RS485 bus connection
  • 3 code, 3 relay (Art.4800M codelock module)
  • 2 push to exit inputs (Art.4800M codelock module)

Products bought with Videx GSM Intercom with Push Button and Keypad - Surface Mounted

Kit Contents

1 x External Audio Panel with selected number of push buttons
1 x GSM interface module (mounted to panel)
1 x Digicode Keypad
1 x Surface back box
1 x Antenna
1 x 12-14v 2A DC Power Supply
1 x Instruction Sheet

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.