Call us on: 01202 717 191

Daitem GSM 3G Intercom System - Up to 200 way

Product Details Price Buy
GSM-3G Intercom System
Daitem GSM 3G Intercom System - Up to 200 way

£564.00 inc.vat


Kit Contents

1 x GSM 3G Intercom 1 x Instruction Manual


Home or office entry control made easy with the GM Techtronics 3G digital GSM intercom system.

The 3G intercom allows you to welcome, filter and control visitors to the home or office.

Use your 3G intercom system to remotely open or close entrances, (pedestrian gates, driveway gates, rising bollards, traffic barriers, garage doors, etc)

Switch on heating, ventilation, air conditioning, pool or fountain pumps that can all be controlled from your landline handset or your mobile phone. 

You can activate external lighting to make access approach safer at night.

The 3G signal gives you crystal clear digital audio communication.


Up to 3 contact numbers can be assigned to each call button, these will ring in sequence.

Only the name plates of buttons in use are lit on the 1 to 8-way version.

384 user codes can be programmed on the 200-way keypad version to operate relays as below.

2 x NO,C,NC relays can be triggered (1~9,999 secs), held open or held closed.


There are 3 individual inputs available:

Input 1 will text you on the inputs change of state.

Input 2 is a Detection input for position contacts, so that you can check if the gate/door is open or closed.

Input 3 is for Egress, that is an input for a push to exit button or keypad controlled exit.


There is a Huge 1150 dial-in user capability that can be programmed and assigned to relay 1 or relay 2.

Unlimited users can operate each relay by typing in the password once the call is answered.

A dial-in call log (history event log) can be requested by SMS, then received back by SMS or e-mail.

The dial-in call history event log can be automatically sent when 100 or 200 calls have been received (user selectable).


Bright Blue backlit call buttons and name plates, ideal for low light areas and night time users.

Microphone and Speaker volumes can be adjusted via the programming commands.

The intelligent Anti-Tamper feature will alert you immediately if the intercom has been moved, (built-in accelerometer & vibration sensor).

Customised text messages can also be programmed.

All intercoms can be flush mounted, or surface mounted with the supplied robust weathershield. 

Vandal resistant, made from strong die cast aluminium. 

No need to dig trenches outside to run any cables inside, No wires need to be installed, just add power!

No potential for any damage to property, either inside or outside your home or office, and definitely no disruption to residents!

Easy to install - No major installation work required


Powered by 12~24v AC/DC @ 55mA average consumption (peaks @ 250mA)

Face plate - 180mm (H) x 109mm (W), Back box - 189mm (H) x 118mm (W) x 65mm (D).


Kit Contents

1 x GSM 3G Intercom 1 x Instruction Manual

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.