Call us on: 01202 717 191

Daitem 5142 Wireless 7 Function Handset

Product Details Price Buy
Daitem 5142 Wireless Handset
Daitem 5142 mains re-charge Li-Ion 7 function handset
£217.13+vat

£260.56 inc.vat

Kit Contents

1 x Daitem 5142 Handset
1 x Instruction Manual

Easy to install:

  • As the system is wireless there is no need to install cables between the mobile handset unit and the main gate, side gate/door or garage door.
  • There is no need to dig trenches or make any holes inside or outside the premises.

Mobile, totally wireless handset:

  • Can be recharged on a base connected to the mains or on an entirely wire-free battery powered base.

Compatible

  • Controls any type of automatic system for gates (that can be fitted with a manual operating mechanism with dry contact), garage doors (using the D5300 receiver), electrical latches or locks, or outside lighting (suits any type of connection).

Modular

  • The same system can operate two seperate apartments in the same property. This also makes it the ideal solution for business individuals and small offices.

Features:

  • D5142 : 7-function mobile handset unit with battery-powered base.
  • Can be used to welcom visitors and manage access to the home for 2 different entrances.
  • When combined with a D5300 receiver, it can also operate 2 automatic garage door control devices.

Advantages:

The handset is powered by Li-Ion batteries which are recharged from alkaline batteries within the base unit (normal operational life of up to 4 years).

Technical data:

The 7 function intercom permits 2-way speech with 2 Controllers plus their respective commands:

  • Electromagnetic door or gate release at each Controller
  • Powered gate control at each Controller
  • 1 or 2 garage door control (requires L5300 switching reciever)
  • 1 courtesy light (requires L5300 receiver).

 

Kit Contents

1 x Daitem 5142 Handset
1 x Instruction Manual

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.