Call us on: 01202 717 191

Farfisa Mycom GSM Intercom System With Keypad

Image for Farfisa Mycom GSM Intercom System With Keypad

Kit Contents

1 x Farfisa MyCom GSM Intercom with Push Button & Keypad
1 x Instruction Manual
Product Details Price Buy
Farfisa MyCom Intercom System with Keypad
Farfisa MyCom GSM Intercom System with Keypad
£475.00+vat

£570.00 inc.vat

Door Station GSM Mycom

The Mycom range from Farfisa uses GSM mobile phone technology to provide gate/door entry systems that are both easy to install and allow residents to be contacted by visitors wherever they are, even in another country!

Each call button on the panel can be programmed with up to 3 telephone numbers (landline or mobile) that will be called in sequence. When the call is answered conversation with the visitor is possible and the gate or lock can be activated from the phone keypad. Mycom modules have 2 relays allowing great flexibility, e.g. vehicle and pedestrian gates being activated independently.

Remote gate/door activation is possible for up to 100 users/residents just by calling, the unit recognises the caller ID from a “permitted numbers list” and allows entry without a call charge being incurred.

Mycom modules form part of the Farfisa Profilo door station range of stylish Italian designed entry panels formed from rugged aluminium with subtle green backlighting of the nameplate(s). In the majority of installations the panels built in GSM antenna provides ample signal strength, for problem signal areas an external antenna can simply be connected for enhanced performance. Programming can easily be carried out by SMS text message or by USB connection to a PC.

Multi-way Mycom panels for up to 50 users can be achieved thanks to the modular construction of the Farfisa Profilo series that also allows the inclusion of an access control keypad or proximity reader into the entry panel.

 

For further details of the Farfisa product range please refer to the Mycom brochure, the Farfisa 2013/14 general catalogue and the Mycom technical manual.

 

Technical Features

  • Programming by USB, SMS (texting) or directly on SIM card
  • Powering 12 Vdc/ac
  • A SIM card is required
  • Pre paid SIM card can be managed

 

Functions

  • Land phone number or mobile phone number (3 numbers in cascade in case of no answer)
  • CLIP function available. It allows caller identification for lock releasing
  • 2 electric lock releases are permitted
  • The max number of users is 50
  • Alarm activation managing

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.