Call us on: 01202 717 191

Topp V1 Interior Sliding Door Automation System

Image for Topp V1 Interior Sliding Door Automation System

Kit Contents

1 x Topp Interior Sliding Door Operator

TOPP V1 automation system for interior sliding doors. Max 50 kg. Opening range from 700 mm up to 1000 mm by micro adjustments. Power supply 230V ~. The door opens and closes with a precise and smooth movement.Control electronic board with microprocessor and on board buttons for the adjustment of the speed parameters of opening and closing, slowdowns space, approaching speed, door open waiting time and operation modes.

The automation main features are:

•  Plug & Play (power and self-learning operation)
•  Pull & Go (pull gently to activate the automatic movement)
•  Slow Speed Function (slow speed to reduce the noise level in night mode)

The product, in accordance with the EN16005 standard for "Low Energy Movement", manages the door speed by a sophisticated electronic control with no need of sensors or safety photocells. It can be easily installed on the existing concealed sliding doors.

The device is CE marked .

Technical Specifications

Power supply: 230V ~ 50Hz

Peripheral power output:
5 V 80mA  / 24 V 110mA
Absorption: 100mA a 230 V
Power absorbed: 15W

Type of use:
Opening/closing speed: In accordance with the EN16005 about “Low Energy Movement” in reference to panel weight

Control of panel weight:
From 150N to 500N adjustable every 35N by the installer
Maximum thrust force: 62N
Door open waiting time: Adjustable from 2 sec to 60 sec
Protection against electric shocks: Class II

Working temperature:
- 5°C + 50°C
Number of door panels: 1 Panel
Maximum capacity: 500N
Size of opening: 700 ÷ 1000 mm
Overall dimensions: 59x59 mm x variable length 700 - 1000 mm

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.