1 x TX433 Grey Key Remote
3-Channel Remote Control 433MHz
Compatible with all our kits apart from Came, FAAC, Nice, BFT and Mhouse.
Works with any GateMotors Q60/Q36/Q57/Q71 control units.
Easy to programme 3 button grey key fob remote controller to operate up to 3 sets of gate/garage door systems. More than 16.000.000 of possible codes, 24 bit. New codes can be generated using dip swiches
Frequency of 433,92 Mhz
Dimensions: 40mm x 67mm x 14mm
To give you an idea of the size of each of the remotes there is a picture below to help
Up to 99 remote controls can be added to each control panel, by following the instructions included with your kit.
Our keyfob transmitters can be used with gate systems from other manufacturers but you will need to add a receiver to your gate system in order to make the keyfobs compatible, see our gate system receivers section for more details.
Why are there three buttons on the remotes?
The key fob is a three channel remote control. Each channel can operate an independent system. For example, a property may have two gates; one entrance gate, one exit gate each operated with their own key fob remote. Instead of carrying around 2 key fobs in your pocket, you can operate both off the one key fob.
As each channel (button) of the remote is separate from the other, one button must be designated and used to operate the gate.
In addition, the key fob can be programmed to have one button to act as an Emergency Stop. This can be handy where an external Emergency Stop push button cannot or has not been fitted.