|Back Stop for On-Wall Installation||
Back Stop for On-Wall Installation. For use when a stop in the ground is not suitable
Gate Stops are an essential part of the gate operation and should be installed with every kit. This gate stop is for when stops can't be installed in the ground. Best for installation on the opening phase of the gate.
The gate stop will be physically installed onto the wall to mark your preffered opening mark.
There is no cabling or wiring required for this item, it is purely to provide resistance for the motors on the gates in their opening/closing phases.
Dimensions of Plate: L=100m W=40mm D=25mm
Dimensions of Stop: Diameter=40mm Depth=40mm