Gate Stops are an essential part of the gate operation and should be installed with every automation kit, even though some gate systems work with in-built limit switches the addition of gate stops can ensure that the motors do not over-run.
See '2' above.
There is no cabling or wiring required for this item, it is purely to provide resistance for the motors on the gates in their opening/closing phases.
This gate stop is suitable for swing gates. Better for installations where deep burying is not suitable or wanted. Allowing the user to have gate stops that easily bolt to the ground.
166P: H=42mm W=100mm
166G: H=48mm W=130mm