Call us on: 01202 717 191

Pre Wired Multicode Receiver OX2

Image for Pre Wired Multicode Receiver OX2
Product Details Price Buy

OX2 pre-wired receiver
OX2 pre-wired receiver with 2 channels without built-in transmitter. For use with Nice 433.92 MHz remotes
£68.80+vat

£82.56 inc.vat

OX2T pre-wired receiver
OX2T pre-wired receiver with 2 channels without built-in transmitter. For use with Nice 433.92 MHz remotes
£72.77+vat

£87.32 inc.vat

Nice 2 Channel FLO2 Remote
Nice 2 channel remote. Compatible with the Nice OX2 receiver
£19.98+vat

£23.98 inc.vat

Nice 2 Channel FLO2R-S Remote
Nice 2 channel remote. Compatible with the Nice OX2 receiver
£18.99+vat

£22.79 inc.vat

Nice 2 Channel 2 One2 Remote
Nice 2 channel remote, ON2. Compatible with the Nice OX2 receiver
£20.06+vat

£24.07 inc.vat

Downloads

Kit Contents

1 x Nice 433.92 MHz Receiver
1 x Instruction Sheet

Complete range of multicode receivers with management of Identity Codes and Certificates. Can work with other brands of automation as well as Nice Automation. If you have one gate with a Nice Automation Motor and another gate with a different branded motor for example then this can be used.

With connector, pre-wired, with and without built-in transmitter. Available in a 433.92 MHz version.

The OX2 being a multicode receiver is compatible with many different fixed and rolling Nice remotes, such as the ON, Smilo range, Flo range and FloR range.

T version: This model is equipped with a “Repeater” function which enables an increase in the transmission range of the transmitters. They also enable “wireless” communication with the O-Box programming unit.

 

Each receiver in the series One has its own secret identification number known as a Certificate to distinguish it from all others. The Certificate can also be programmed on the transmitter in the One range which uses it as an enable code to interact with the receiver.

Practical and functional: the built-in transmitter of the receivers enables bi-directional communication with the multi-functional O-Box interface operations such as download of radio codes, management of certificates and passwords directly on the receiver, also when located in positions difficult to access.

3 password-protected levels.

Internal transmitter: the OX2T receiver can be used as signal repeaters to increase the operating distance between transmitters and other possible receivers in the One series. By means of O-Box, the new receivers in the One series can also be interfaced with a PC or PDA for simple and rapid programming of certificates.

3 programming modes.

Maximum flexibility: memory capacity of up to 30 transmitters in Mode l.

Multicode: receivers in the One series are compatible with the transmitters with encoding system O-code - 433.92 MHz for multi-group transmission, which enables the delivery of multiple commands simultaneously from a single transmitter.

Technical Specifications (OX2 & OX2T)

Downloads

Kit Contents

1 x Nice 433.92 MHz Receiver
1 x Instruction Sheet

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.