Call us on: 01202 717 191

Nice Intikit Universal Control System

Image for Nice Intikit Universal Control System

Kit Contents

3 x Two-channel remotes (in red, green and blue)
1 x OX2 receiver
1 x Instruction Sheet
Product Details Price Buy
Nice Inti Universal Kit
Suitable for 12/24v automation to allow up to two types of automation to be operated, a good replacement item if you can no longer buy remotes for your system. Comes with Nice ON2 receiver and three Inti remotes
£99.00+vat

£118.80 inc.vat

The kit contains: 3 two-channel remotes (colours red, green and blue) and 1 OX2 receiver (for plugging into control panel to pick up the new remotes).

If you compare this to buying them on their own, it works out to be £56.25 for the remotes and £97.20 for the receiver. You are therefore saving a massive £54.45 by buying this kit.

 

2 channel remotes mean you can control two types of automation e.g. gate and garage door.

The system is great if you have an existing FAAC system for example or any other brand which the remotes are no longer made for that frequency. You will still be able to use your old remotes if you buy this, you'll just be plugging in an extra receiver. You'll be saving yourself money buying this kit over a new FAAC receiver (£42.50) then the cost of their remotes (£76.02 for three).

 

Suitable for 12/24v automation to allow up to two types of automation to be operated, a good replacement item if you can no longer buy remotes for your system.

 

The colourful new line of 1 and 2 channel miniaturised transmitters is available in six colours and provides the following benefits:

  • 433.92 MHz rolling code with management of identity codes and certificates, self-learning and built-in proximity receiver
  • 72 bit O-Code encoding
  • Compatible with receivers with Nice FLOR encoding
  • Uses data processing and recognition systems that increase its degree of security
  • Automation designed to deliver quicker response times.
  • Simple programming, even at a distance, thanks to Opera receivers by: Using a transmitter already programmed in the receiver, thanks to the enabling Code exchange between the two 
  • Using the Nice O-Box connection interface. The receiver’s Certificate is entered by just placing the new Inti next to the O-Box and following the guided procedure on a PC or PDA
  • If a transmitter is stolen or lost with the O-Box the user can replace it, maintaining the same functions as in the previous one or disable the old transmitter by increasing the priority level on the new Inti

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.