Call us on: 01202 717 191

FAAC E 124 Control Board

Product Details Price Buy
FAAC E 124 Control Board
Extremely user friendly control board with 3 keys and LCD for programming, via PC with USB cable or X-COM wireless adapter. 2 programmable multifunction outputs with work and pause time of 0-10 minutes. Control board housing is included.

£302.88 inc.vat


Kit Contents

1 x FAAC E 124 Control Board

Only compatible with the FAAC Automation range


Can be used with the FAAC 390 24v operator, the FAAC 415 24v LS version, the FAAC S418 24v operator, the FAAC S450 24v operator, the FAAC 770 24v operator, the FAAC S 800 H 24v operator and the FAAC 413 24v LS version.


FAAC E 124 control board, extremely user friendly with 3 keys and LCD for programming, via PC with USB cable or X-COM wireless adapter. 2 programmable multifunction outputs with work and pause time of 0-10 minutes.


Technical Specifications

Power supply voltage 230 Vac (+6%-10%) 50 (60) Hz
Absorbed power 4 W Stand-by approx 400 W max.
Motor max. current 7 A
Accessory power supply 24 Vdc
Accessory max. current 500 mA 24 Vdc - 500 mA BUS - 2 Easy
Operating ambient temperature -20°C to +55°C
Protection fuses Power cord 2.5A? Control board self resetting
Function logics Automatic (A), Semi-automatic (E), Automatic 1 (A1). "Stepped" automatic (AP), Dead man (C), Automatic safety (S), Stepped safety (SP), "Stepped" semi-automatic (EP) Semi-automatic B (B), Mixed logic (BC), Custom (customisable, programmable by the installer via PC)
Work time Programmable (from 0 to 10min.)
Pause time Programmable (from 0 to 10min.)
Motor power Adjustable over 50 levels
Inputs BUS 2 Easy, inputs completely programmable via PC (open A, open B, close, priority open, priority close, emergency close, emergency open, stop, safety device at opening, safety device at closure) Inputs for 4 limit switches (open, close, motor 1/motor 2), connection inputs for 2 motors, encoders
Outputs 2 programmable multifunction outputs
Rapid connectors OMNIDEC (XF868), X-COM, 5 pin board connection for Minidec, decoder, RP/RP2 receiver
Programming 3 keys (+,-,F) and LCD display, via PC with USB cable, via PC and X-COM (wireless module)
Programmable functions Logic, pause time a, pause time b, thrust, speed, deceleration spaces, leaf delay, wind-proof facility, reverse-stroke, soft-touch, stroke at opening and closing, initial thrust, deceleration speed, indicator lamp, fail-safe, programming of 2 Easy devices, service request, power-safe, battery charger timer function, battery operation, clock, time-out, pre-flashing time, motor type, encoder sensitivity
Speed Adjustable over 10 levels


Kit Contents

1 x FAAC E 124 Control Board

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.