|BFT RIGEL 6 Control Board||
BFT RIGEL 5 Control Board
Control panel for one or two 230v motors (max 375w) with independent force adjustment. Hugely popular control panel for use with swinging and sliding gate motors. Every requested function at your finger tips and very easy to use.
- Separate start commands. (Enter and Exit)
- Separate Open and Close commands.
- Hold open facility on latching Open command.
- N/C Inputs for P/cells, block and safety edge.
- Open and Closed limit switch inputs for 2 motors.
- 12v Lock output and Reverse blow for lock release.
- 2 or 4 step logic.
- Optional plug in: Radio receiver / Traffic light board.
- Holding closed: Hourly pulse for hydraulic motors.
- Run time adjust: 0 – 100 seconds or 40 – 180 seconds.