Call us on: 01202 717 191

Nice Popkit 7124 Double Gate Opener Kit

Image for Nice Popkit 7124 Double Gate Opener Kit
Product Volt Weight
per leaf
per leaf
per leaf
Type Price Buy
Nice PopKit 7124 - Double Gate Opener Automation Kit
200 kg
Articulated Arm, Double Kit

£633.35 inc.vat

Kit Contents

2 x Motors
1 x Radio Remote
1 x Set of Wired Photocells
1 x Flashing light with integrated aerial
1 x Instruction Manual

Suitable for inward opening gates.


For swing gates with each leaf up to 2m, also suitable for gates with large posts and structures.

Irreversible electromechanical 24 Vdc gearmotor with articulated arm, surface mounted. Intensive use.


Resistant and compact: 167mm in width, ideal for any kind of post. Small shockproof body with aluminium base.

Energy saving, respect for the enviroment, autonomy: 3 standby modes to reduce mains consumption, or battery powered consumption if connected to the solar power Solemyo kit (can be seen on our site under 'Solar Panel Kits').

Powerful: thanks to the 250 Nm torque.

Sturdy, aluminium, anti-shearing arm.

No blackout: with the optional PS124 battery backup that can be bought to sit inside the gearmotor.

User friendly: release with personalised Nice key, designed for cord-type release.

Easy to install: no welding.

New built-in control unit equipped (PP7124) with Nice BlueBUS technology and compatible for operation with Opera and Solemyo (solar panel).

Just 3 keys to faciliate programming:

  • decleration on opening and closing;
  • in-built obstacle detection - if something or somebody comes into contact with the gate when it's in operation, then it will stop and back off;
  • easy option of connecting additional pairs of photocells - great for extra safety on both sites of the gate;
  • automatic memorisation of limit switches on opening and closing with self-learning function - this means you won't need gate stops or any other form of resistance in place at the opening and closing phases of the automation;
  • programming of pause time;
  • opens up to 110° (depending on bracket position);
  • pedestrian open and partial open.



Kit Contents

2 x Motors
1 x Radio Remote
1 x Set of Wired Photocells
1 x Flashing light with integrated aerial
1 x Instruction Manual

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.