Call us on: 01202 717 191

Nice Kit Wingo - Double Electric Swing Gate Openers

Image for Nice Kit Wingo - Double Electric Swing Gate Openers
Product Volt Weight
per leaf
per leaf
per leaf
Type Price Buy
Nice Wingo 2024 Kit
200 kg
Linear Ram

£606.00 inc.vat
Nice Wingo 3524 Kit
200 kg
Linear Ram

£714.00 inc.vat

Kit Contents

2 x Motor (Each with Limit Stop)
2 x Wired Safety Photocells
1 x Control Board (with Built In Receiver)
2 x Radio Remotes
4 x Brackets and Fixings
1 x Manual Release Key
1 x Instruction Manual

The Kit Wingo is ideal for inward opening swing gates with leaves up to 3.5m. An electromechanical gear motor, surface mounted. Ideal for residential and industrial use.

New third generation models: quality and durability thanks to the housing, made up of two tough aluminium shells with polyester paint finish; more resistant to atmospheric agents.

Internal moving parts completely in steel, light alloys and technopolymers.

Reliable and silent: patented layout of internal parts and lead nut in bronze.

Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor.

Simple installation and maintenance, with built-in capacitor.

New Moonclever control unit (MC424):
• easy programming by pressing a single button;
• clutch with anti-crush safety feature;
• automatic memorization of limit switches in opening and closing with self-learning function;
• pause time programming; partial opening; slowdown during opening and closing.

Sophisticated electronics: slowdown, obstacle detection system, can be linked to the 8,2 KOhm resistive sensitive edge.
No blackout: continues to work even during power failures using optional (PS124) batteries that fit inside the control unit.

Nice Automation Toona Kit

1 - Wingo linear RAM
2 - Electric Safety Photocells
3 - Remote keyfob
4 - Control Unit
5 - Keyswitch

Perfect for residential or light intensive use :

• simple programming, by means of a single key;
• self-learning of opening and closing limit positions;
• automatic fault diagnostics;
• programming of pause time;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• operation in event of power failure by means of optional rechargeable batteries (PS124);
• provision for connection of latest generation resistive sensitive edges.

Nice Automation Wingo Technical

The above diagram shows the max gate length and the max gate weight, these values are dependent upon each other, please check the length of your gate against the chart to see the max gate weight.

With all linear automation (straight arm motor) the laws of geometry do apply. These are a series of measurements that aid the motors to pivot on its triangular mounting bracket. If the measurements are not achieved, the motor will not pivot on its bracket and the gate will fail to achieve its full opening angle.

Below, the picture is of a birds-eye view of a typical gate leaf mounting:

The Kit Wingo operator and bracket are positioned so as dimensions A & B comply to the installation instructions supplied with the kit.

The values are dependent on the Kit Wingo model selected and dimension D.

Plan diagram of kit wingo

Wingo 2024 Detail

Kit Wingo 3524 Details

Installation Hint:

When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.

This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.

Kit Wingo optional upgrades and accessories include:

    * underground exit loop (detects the presence of a vehicle and automatically opens the gate)
    * extra photocells
    * additional key fobs
    * intercom kit
    * extended range (external) aerial

Products bought with Nice Kit Wingo - Double Electric Swing Gate Openers

Kit Contents

2 x Motor (Each with Limit Stop)
2 x Wired Safety Photocells
1 x Control Board (with Built In Receiver)
2 x Radio Remotes
4 x Brackets and Fixings
1 x Manual Release Key
1 x Instruction Manual

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.