Call us on: 01202 717 191

Nice Kit Hyppo - Gate Openers, Articulated

Image for Nice Kit Hyppo - Gate Openers, Articulated
Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
Nice HyppoKit 1, 230v
230v
400 kg
115°
3m
Articulated Arm, Double Kit
£854.50+vat

£1,025.40 inc.vat

Kit Contents

2 x Kit Hyppo motors
2 x Folding arm & fixing brackets
2 x Wired Safety Photocells
1 x Electronic Control Board (with in-built 100m aerial)
2 x Remote Keyfob Controllers (ON2e)
1 x Override Key (for power cuts)
4 x Brackets with fixings & fittings
1 x Instruction Sheet

The GateMotors Kit Hyppo articulated arm kits are quick and easy to install and ideal for DIY installation or gates installed between brick or stone pillars with leaves up to three metres each, especially where the GateMotors Kit Aster or Kit Diamond can’t be fitted.

It can be fitted to gates that open inwards without the need for special modification, the 24v kit also has in-built double limit-switches in both the opening & closing phase so physical gate stops are not required.

Opening angles of up-to 115° may be achieved dependent on gate hinge position. The operators are non-reversible and therefore don’t need the inconvenience or expense of an additional electric lock to keep them closed.

Easy installation, with adjustable accessories and brackets. Incorporated release key. Pivoted arm transmission adjustable and anti-shearing safety. The perfect integration of its components ensures the greatest quietness.

It is designed for intensive use by using a die-casting structure made of quality aluminium, stainless steel, bronze and steel. The fluid-grease lubrication system and the built-in thermal protection ensure a long-lasting working life in any weather conditions without the need for periodic maintenance.

 

If you are purchasing the HyppoKit 1 you will receive A60 control unit and the BF surface-mounted photocells.

If you are purchasing the HyppoKit 2 you will receive the MC824H control unit and the MOFB outdoor photocells.

 

 

Nice HyppoKit

 Installation Hint:


When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.

This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.

Nice HyppoKit

Kit Hyppo optional upgrades and accessories include:

    * underground exit loop (detects the presence of a vehicle and automatically opens the gate)
    * extra photocells
    * additional key fobs
    * intercom kit
    * extended range (external) aerial

Please Note: It is solely the responsibility of the recipient or the client / specifier – to ensure that the products described are suitable for purpose (see fitting guide under downloads) & comply with the relevant building regulations.

Products bought with Nice Kit Hyppo - Gate Openers, Articulated

Kit Contents

2 x Kit Hyppo motors
2 x Folding arm & fixing brackets
2 x Wired Safety Photocells
1 x Electronic Control Board (with in-built 100m aerial)
2 x Remote Keyfob Controllers (ON2e)
1 x Override Key (for power cuts)
4 x Brackets with fixings & fittings
1 x Instruction Sheet

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.