Call us on: 01202 717 191

Nice HykeKit - Articulated Twin

Image for Nice HykeKit - Articulated Twin
Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
Nice HykeKit 1
24v
200 kg
110°
3.5m
Articulated Arm
£917.18+vat

£1,100.62 inc.vat

Kit Contents

1 x Motor (with Built In Control Board)
1 x Motor
2 x Wired Safety Photocells
1 x Radio Remote
1 x Instruction Manual

For swing gates with a leaf of up to 3.5m, also with large columns.

Irreversible electromechanical gear motor 24 Vdc with magnetic encoder. With articulated arm mounted externally. Ideal for intensive use.

 

New third generation model: quality and durability thanks to the housing in aluminium with polyester paint finish, resistant to atmospheric agents.

Ultra-powerful and delicate: thanks to the torque of 500 Nm and encoder technology, for millimetric precision and reliability. Safety in movement with dual technology and in-built obstacle detection. Obstacle detection means that if something or somebody comes into contact with the gate while it's in motion, then it will stop and back off.

Two irreversible 24 Vdc versions with limit switches on opening and closing: with one motor having a built in control unit (HK7024) and the other without (HK7224).

Practical and quick installation: the articulated arm is adjustable in length for maximum flexibility.

Simple and precise limit switch adjustment: mechanical stops and micrometic adjustment. Limit stops means that you won't need physical gate stops in place in the opening and closing phases.

Easy to operate release lever for disengaging the motor so you can manually push the gates. Metal lock and personalised Nice key. With provision for cable control.

Savings, respect for the enviroment, and autonomy: can be connected to an optional buffer battery so the gates can still operate on a number of cycles if there is a powercut at the gates. 

No black out: with the option of PS124 battery housed inside the gear motor.

Built-in control unit (HK7024):

  • simple programming via a single key;
  • self-learning of opening and closing limit positions;
  • automatic fault diagnostics;
  • pause time programming;
  • pass door;
  • deceleration on opening and closing;
  • obstacle detection with dual technology;
  • provision for connection of latest generation sensitive edges.

 

 

 

 

Installation Diagram

Products bought with Nice HykeKit - Articulated Twin

Kit Contents

1 x Motor (with Built In Control Board)
1 x Motor
2 x Wired Safety Photocells
1 x Radio Remote
1 x Instruction Manual

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.