Call us on: 01202 717 191

Kit MyFlow - Double Wheeled Gate Automation Kit

Image for Kit MyFlow - Double Wheeled Gate Automation Kit

Kit Contents

2 x Motors
2 x Wired Safety Photocells
1 x Control Board (with built in aerial)
2 x Radio Remotes
1 x Vertical Electrolock & Keep Plate
2 x Brackets and Fixings
2 x Manual Release Keys
1 x Instruction Manual

Safety+ Kit also includes:
1 x Photocells
1 x Emergency Stop
2 year limited warranty
Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
Kit MyFlow 230v Safety+
230v
250 kg
270°
unlimited
Wheeled
£619.14+vat
RRP £1,491.06 Save 50%

£742.97 inc.vat
Kit MyFlow 230v
230v
250 kg
270°
unlimited
Wheeled
£580.80+vat
RRP £1,289.60 Save 46%

£696.96 inc.vat

Looking for the single gate Kit MyFlow, then view our range of single swing gate openers.

The Kit MyFlow electromechanical wheel operator kits are cost effective method of gate automation and are ideal where long light gates are in place and will swing as far as 270° and is suitable for inward opening gates.

This system is designed for large gates and also works well on gates with a sloping drive. It also opens far faster than traditional systems. The way the gate is hung also normally makes no difference to this kit.

Our operators are designed for intensive use; they are constructed of quality die-cast aluminium with stainless steel, bronze and steel parts.

The fluid-grease lubrication system, polyester powder-paint coating, self-lubricating worm gear and built-in thermal protection system ensure quiet operation and a long working life in all weather conditions, without the need for periodic maintenance.

The aerial within the kit is pre-installed and has a range of approx 30m.

The physical dimensions of the motor can be found on page 3 of the Installation guide which is available from the Downloads section in the right hand corner of this page.

 

Runner Installation

Installation Hint:

The illustration show the gates closed and the operators fixed to the internal (property side) of the gate

If you only have a single gate and you are not sure if you need a right-hand or left-hand kit?

The motor is usually mounted on the inside of the property for security; so view the gates from inside the property looking outwards (the gates will normally, but not always, swing toward you).

If the hinge appears on the left, you need a left-hand kit; if it's on the right you need a right-hand kit. 

Please note: the remotes that you receive with this kit may be a different colour to what's shown in the image.

 

Kit MyFlow optional upgrades and accessories include:

    * gate stops (all of our gate motors require some form of resistance at the end of the opening & closing phase.)
    * underground exit loop (detects the presence of a vehicle and automatically opens the gate)
    * extra photocells
    * additional key fobs
    * intercom kit
    * extended range (external) aerial

Please Note: It is solely the responsibility of the recipient or the client / specifier – to ensure that the products described are suitable for purpose (see fitting guide under downloads) & comply with the relevant building regulations.

Optional additional accessories for Kit MyFlow - Double Wheeled Gate Automation Kit

Optional Accessories

  1. EMIS120 GSM/Wifi Switch

    EMIS120 GSM/Wifi Switch

    from £152.99
  2. ASO 225 TK 25mm Safety Edge - 2000mm

    ASO 225 TK 25mm Safety Edge - 2000mm

    from £115.00
  3. 1 x MyGate Grey Key Fob

    1 x MyGate Grey Key Fob

    from £25.00
  4. MyGate Square Wired Photocells

    MyGate Square Wired Photocells

    from £34.20
  5. Emergency Stop Button - Twist Release

    Emergency Stop Button - Twist Release

    from £6.73

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.