Call us on: 01202 717 191

Came Fast40-P24 - Double Swing Gate Kit

Image for Came Fast40-P24 - Double Swing Gate Kit
Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
Came Fast40-P24 Kit
24v
200 kg
90°
2.3m
Articulated Arm
£886.63+vat

£1,063.96 inc.vat

Kit Contents

2 x Motor with Built in Control Board
1 x Frequency Card
2 x Wired Safety Photocells
2 x Radio Remote
1 x Antenna
1 x Instruction Manual

The ideal solution for fitting on medium and large gate posts in residential or apartment block settings.

Fast belongs to an innovative series of versatile, powerful swing-gate operators; designed for medium-to-large pillars. With Fast40, installation is quick and no extra work is needed on the pillar or gate itself.

  • Handy release lever for manually opening the gate.
  • All model are fitted with simplified connections featuring one single three-conductor cable.
  • The 24 V versions can also operate during power outages.
  • Compatible with the Zero-E solar panel to power the operator where there are no connections to the electricity line.
  • The 24 Volt operator features the SLEEP MODE function as a standard.

 

Technology within arm's reach

Fast40 is suitable for applications in medium and large pillars. Thanks to the jointed arm, swing gates with leaves up to 2.3 m in length can be moved.

 

New performance, high technology

  • internal control board, also in the 24 V version
  • reduced installation time
  • mechanical stops, built into the gearmotor, adjustable during opening and closing to make it possible to eliminate the traditional, bulky “ground stops” on the fixture

 

Benefits

For installers: easy connection with only one cable with three wires (24 V version); EN Tested technology for easy system certification in accordance with European standards.

For users: fully adjustable gate run and slowdown management, ensuring safety and reliability.

 

Safety...always

  • safety even when the gate is not moving. Each command is cancelled if an obstacle is detected by the safety devices
  • the motor with encoder enables easy management of the slowdown and obstacle detection stages
  • self-diagnosis of safety devices
  • release lever, in a handy position to facilitate manual gate opening during a power failure

 

Simplicity and savings

The 24 V Fast40 version is equipped with the new “Sleep Mode” technology that minimises the consumption of electrical energy when the motor is not in service.
Furthermore, it is compatible with the new Zero-E solar power panel, enabling gate operation even in areas without electric current.

 

Weight and Width Guide

Products bought with Came Fast40-P24 - Double Swing Gate Kit

Kit Contents

2 x Motor with Built in Control Board
1 x Frequency Card
2 x Wired Safety Photocells
2 x Radio Remote
1 x Antenna
1 x Instruction Manual

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.