Call us on: 01202 717 191

Came AXO-P Kit - Twin Linear Ram Gate Opener Kit

Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
Came AXO P4 Kit
230v
300 kg
120°
4m
Linear Ram
£817.96+vat

£981.55 inc.vat
Came AXO-P7 Kit
230v
300 kg
120°
7m
Linear Ram
£842.27+vat

£1,010.72 inc.vat
Came AXO-P3 Kit
230v
500 kg
120°
3m
Linear Ram
£866.21+vat

£1,039.45 inc.vat
Came AXO-P324 Kit
24v
500 kg
120°
3m
Linear Ram
£889.40+vat

£1,067.28 inc.vat

Kit Contents

2 x Motor
1 x Frequency Card
2 x Wired Safety Photocells
1 x Control Board
2 x Radio Remote
1 x Antenna
1 x Instruction Manual

 

The Came Axo is an electromechanical operator designed for long life and utmost safety even with very large gates. 

The Axo gearmotor has bearing semi-shells in die-cast aluminium of excellent quality and silent running.

Axo is equipped with adjustable mechanical stops to memorize the gate run.

The 24v version has a simplified connection system with only one single three wired cable and with innovative 230v technology, which gives very efficeint and simple control of slowing down movements.

Besides the usual control and safety functions, Axo’s 230V electronics provide certain details that allow for total control of the operator, these include:

  • Total control of the gate from the transmitter control including the possibility of immediately stopping the movement of the gate leaves.
  • Possibility of programming the gate to partially open. Ideal for all entrances that don’t have a specific pedestrian gate.
  • System’s active safety-devices test performed prior to each gate opening and closing cycle.

The Axo also has the following features:

  • Tested according to applicable rules and regulations.
  • The 24v version can function in emergency mode during power outages.
  • Available both in the reversible and self-locking versions.
  • Worm screw is always protected thanks to its dedicated cover.
  • The 24v version comes with a simplified connection system featuring a single, three-core cable that handles both motor and encoder.
  • Encoder-based technology to manage decelerations.
  • Adjustable mechanical stops to memorise the gate-run.
  • Supporting aluminium half-casings.
  • The AX3024 and 5024 motors have a battery backup built-in which allows you to operate the gates just using the remotes suting power outages (please note: You will need two receiver cards (AF43S) for this to work. Click here to add additonal card).
  • The 230v Axo kits come with the ZM3E control panel.
  • The 24v Axo kits come with the ZLJ24 control panel.

Need more information or advice on this kit ? Call our sales support team on 01202 717 191.

 

Products bought with Came AXO-P Kit - Twin Linear Ram Gate Opener Kit

Kit Contents

2 x Motor
1 x Frequency Card
2 x Wired Safety Photocells
1 x Control Board
2 x Radio Remote
1 x Antenna
1 x Instruction Manual

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.