Call us on: 01202 717191

Farfisa Clickit Surfaceflush Mounted Audio Intercom

Product Details Price Buy
Farfisa ClicKIT Two Way Flush-mounted 4+1 Intercom
A 2CK farfisa audio intercom 4+1 technology, two way flush-mounted. Includes two push buttons on the caller unit and two handsets
£85.00+vat

£102.00 inc.vat

Kit Contents

1 x Push Button panel
1 x Handset
1 x Power supply
1 x Instruction manual

 

The new Farfisa ClicKIT range offers a stylish yet economical solution for 1 and 2 way audio installations. Both traditional (4+1) and reduced (1+1) wiring options are available which include either a flush or low profile surface mounting (just 28mm!) door station that benefits from a fresh modern design with white LED backlighting. ClicKIT products also contain contemporary styled Exhito handsets.

Features

Clickit is the new audio kit line for all 1 or 2-way solutions. Installing the kit is as easy as a click, because the practical package is complete and ready for installation, because it is versatile, because the push-button panel has a new appealing look, because all items are compact, because the most simple and most common electronic call technologies are available, because it is for 1 or 2 users.

And if you don’t think it’s enough ...

then have a look at the details of the new Click external station: reduced dimensions for best solution in case of small spaces, such as gates or columns, high resistance and protection level against external agents, excellent quality/price ratio, anodized aluminiumm front plate, large name plate, indispensable backlight with elegant white LEDs for plate and also door keeper and microphone, version for surface or flush mounting, call confirmation guaranteed for external user.

ClicKit includes all installation elements, from the Click external station to the Exhito elegant internal unit and power supply.

The packaging is modern, practical and contemporary. Aci Farfisa presents 8 types of kits according to technology, installation mode of the external station and number of users to solve all types of one or two-family applications.

ClicKit, so easy, so click!

With the 1+1 technology only two conductors are needed to connect the outside caller unit to the handset. Also supplied in the traditional 4+1 system for high quality signal throughout.

For wiring support have a look at the guides on the top right hand side of the page under 'Downloads'. 100m cable distance max recommended from the outside caller unit to the handset.

 

Kit Contents

1 x Push Button panel
1 x Handset
1 x Power supply
1 x Instruction manual
Proteco Price Match Promise Order before 3pm Why buy from us? Gate Safe

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.