Call us on: 01202 717191

Proteco Meko - Sliding Gate Kit

Product Volt Weight
max
per leaf
Angle
max
per leaf
Width
max
per leaf
Type Price Buy
Kit Meko 8
230v
800kg
13.0m
Sliding
£504.96+vat

£605.95 inc.vat
Kit Meko 5
230v
500kg
13.0m
Sliding
£485.28+vat

£582.34 inc.vat
Kit Meko 6
24v
600Kg
13.0m
Sliding
£515.94+vat

£619.13 inc.vat

Kit Contents

1 x Motor with Built In Q80S/Q20S Control Board
2 x Wired Safety Photocells
2 x Radio Remotes
1 x Safety Blinker Light
8 x 50mm Length Rack
1 x Manual Release Key
1 x External Aerial

Products bought with Proteco Meko - Sliding Gate Kit

 

Product Features

The Proteco Kit Meko covers sliding gate dimensions up to 13 metres in length through rack driven electromechanical geared motors. 

The versatile Meko can be simply and accurately installed thanks to its adjustable (vertically & horizantly) ground plate.

The system also carries an embedded control unit with obstacle detection functionality along with an irreversible gear-motor to ensure secure locking and quiet operation.

Each kit contains a die-cast, compact Meko motor built from aluminium, stainless steel and bronze which ensures durability even under intensive use.  

The rack included in the sliding gate kit is supplied in 8 x 0.5m lengths. Each rack length is constructed from metal coated in nylon and the lengths lock together to provide 4m in total. 

The 24V version is suitable for intensive use and it can be equipped with a backup battery in case of power cut. Click here to buy.

 

Limited Warranty - 3 years on motors, 1 year on other components. See T&C's for more info.

 

Product Details

Kit Meko 5

Kit Meko 6

Kit Meko 8

Power Supply

230v  24v dc

230v

Current

1,2 - 1,7A  0,7 - 10A

1,2 - 2A

Motor Power

250W 80W

300W

Capacitor

8µF -

10µF

Opening direction

Left or right  Left or right

Left or right

IP rate

44  44

44

Revolutions (speed)

1400 rpm 1600 rpm 1400rpm

Opening Speed

10,5 m/min 6-11 m/min 10,5 m/min
GAte Maximum Weight 500 Kg 600 Kg 800 Kg
Duty cycle 40% 80% 40%

 

If you require any hardware for your sliding gate set up such as more rack length or alternative wheels, these can easily be supplied – simply click here or call one of our sales team for more information on 01202 717 191.

 

 

Need more information or advice on this kit ? Call our sales support team on 01202 025116 or complete our site assessment form and we can advise the right kit for your installation. 

Kit Contents

1 x Motor with Built In Q80S/Q20S Control Board
2 x Wired Safety Photocells
2 x Radio Remotes
1 x Safety Blinker Light
8 x 50mm Length Rack
1 x Manual Release Key
1 x External Aerial
Proteco Price Match Promise Order before 3pm Why buy from us? Gate Safe

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.