MyGate Diamond Motor Only -230v/24v Linear Ram

Kit Contents

1 x Diamond Ram Operator
1 x Override Key (for power cuts)
1 x Instruction Sheet
Diamond Motor Only

Purchase options for MyGate Diamond Motor Only -230v/24v Linear Ram

Product Volt Weight
maximum
per leaf
Angle
maximum
per leaf
Width
maximum
per leaf
Type Price Buy
MyDiamond 3Ti - Motor Only 230v 350 kg 110 2.0m Motor Only, Ram, Ambidextrous £162.36 ex VAT
£194.83 incVAT
RRP £314.66 incVAT
Save 38%
Add to cart
MyDiamond 4Ti - Motor Only 230v 400 kg 120 3.0m Motor Only, Ram, Ambidextrous £173.11 ex VAT
£207.73 incVAT
RRP £329.34 incVAT
Save 36%
Add to cart

Optional additional accessories for MyGate Diamond Motor Only -230v/24v Linear Ram

Product Details Price Buy
myAster Ram Bracket Kit, Double full set (inc fixings)
Bracket Kit, Double full set (inc fixings)
Brackets for mounting two motors to the post and to the gates ( 4 brackets in total - 2 x S1 Rear Bracket Left and Right, 2 x S3 Front Bracket plus fixings). £25.27 Add to cart
myAster Ram Bracket Kit, Single LH full set (inc fixings)
Bracket Kit, Single LH full set (inc fixings)
Brackets for mounting a single left hand motor to the post and to the gates ( 2 brackets in total, 1 x S1 Left Rear Bracket, 1 x S3 Front Bracket plus fixings). £15.13 Add to cart
myAster Ram Bracket Kit, Single RH full set (inc fixings)
Bracket Kit, Single RH full set (inc fixings)
Brackets for mounting a single right hand motor to the post and to the gates ( 2 brackets in total, 1 x S1 Right Rear Bracket, 1 x S3 Front Bracket plus fixings). £15.13 Add to cart
Fixing Set
Fixings set for bracket packs
Fixings for mounting two motors to the posts and to the gates (4 x G1, 4 x PR1, No Brackets). £7.19 Add to cart
myAster Ram L shaped S3 gate leaf bracket
L-shaped S3 bracket
S3 Front (Gate Leaf) L-Shaped single bracket for Ti ram motors to fix to the gate.(No fixings included) £5.84 Add to cart
myAster Ram Left Hand S1 Gatepost Bracket
Left Hand Triangular S1 bracket
Left Hand rear (gatepost) single triangular shaped S1 bracket for fixing Ti ram motors to the gate post.(No fixings included). £8.06 Add to cart
myAster Ram Right Hand S1 Gatepost Bracket
Right Hand Triangular S1 bracket
Right Hand rear (gatepost) single triangular shaped S1 bracket for fixing Ti ram motors to the gate post.(No fixings included) £8.06 Add to cart
myDiamond Blank release Key
Release Key (Blank / Uncut)
Blank/Uncut Release Key which can be cut to your existing release key as a spare. If you do not have an existing key you will need the both the key and barrel to be replaced. £7.80 Add to cart
Capacitor for Old Style Black/Charcol Junction Box Capacitor (230v 8mF) for Old Style Black/Charcoal Junction Box £4.04 Add to cart
Capacitor for New Type Light Grey Junction Box Capacitor (230v 8mF) for New Type Light Grey Junction Box £2.71 Add to cart

 

3 year warranty on this gate kit

This motor has 3 year limited warranty, the first year being with GateMotors, the remaining years being direct with the manufacturer. The motors themselves have a 3 year limited warranty all other electrical items have a 1 year warranty, see the warranty FAQ page for more details.

The GateMotors Diamond electromechanical rams are a cost effective method of gate automation. They are ideal where the gates are hung in the middle of the posts, or close to the edge of the pillars (see diagrams on the Technical Info page). Their advantage over the Gatemotors Aster Ram or other traditional ram styled kits is their slim-line design and slightly more powerful motor. The rams are non-reversible and therefore don’t need the inconvenience or expense of an additional electric lock to keep them closed.


You can achieve up-to 120° opening angles, depending on hinge position and model in use; suited to gate openings of up to 6m (3m per leaf) and maximum gate weight of up to 400Kg per leaf. These motors are only suitable for inward opending gates.

The GateMotors slimline Diamond Ram is designed for intensive use; motors are constructed of quality die-cast aluminium with stainless steel, bronze and steel parts.

The fluid-grease lubrication system, polyester powder-paint coating, self-lubricating worm gear and built-in thermal protection system ensure quiet operation and a long working life in all weather conditions, without the need for periodic maintenance.

If you only have a single gate and you are not sure if you need a right-hand or left-hand kit?

The motor is usually mounted on the inside of the property for security; so view the gates from inside the property looking outwards (the gates will normally, but not always, swing toward you).

If the hinge appears on the left, you need a left-hand kit; if it's on the right you need a right-hand kit.

Kit Diamond

These diagrams show the gates closed and the operator mounting brackets fixed to the back face of each pillar (from inside the property).



With all linear automation (straight arm motor) the laws of geometry do apply. These are a series of measurements that aid the motors to pivot on its triangular mounting bracket. If the measurements are not achieved, the motor will not pivot on its bracket and the gate will fail to achieve its full opening angle.


Below pictures are birds-eye views of two types of typical gate leaf mounting:

FIG 1 – Gate leaf hinged in the centre of the pillar

FIG 2 – Gate leaf hinged on corner of the pillar

The Diamond Ram operator and bracket are positioned so as dimensions A & B comply to the installation instructions supplied with the kit.

The values are dependent on the Diamond Ram model selected.

Dimensions to Achieve

For the Diamond Ram 3Ti (2m max per leaf)
A = 145mm
B = 145mm


For Diamond Ram 4Ti (3m max per leaf)
A = 195mm
B = 195mm


For Diamond Ram 4TA (2m max per leaf)
A = 195mm
B = 195mm


IF DIMENSIONS FOR THE INSTALLATION ARE NOT ACHIEVED, THE MOTOR(S) WILL FAIL AND MAY BREAK. DAMAGES TO THE MOTOR(S) RESULTING FROM INADEQUATE INSTALLATION IS NOT COVERED UNDER OUR 1 YEAR GUARANTEE

 

Installation Hint:

When fitting the gate brackets to a wooden gate, we recommend that you insert stainless steel tubing (just large enough to sleeve the mounting bolt threads, and 1mm shorter than the thickness of the wood) through the gate mounting holes.

This will prevent over-tightening of the mounting bolts, and also avoid the repetitive push-pull on the mounting bolts from damaging the wood.

If you only have a single gate and you are not sure if you need a right-hand or left-hand motor?

The motor is usually mounted on the inside of the property for security; so view the gates from inside the property looking outwards (the gates will normally, but not always, swing toward you).

If the hinge appears on the left, you need a left-hand motor; if it's on the right you need a right-hand motor.

For more information on the electrical cabling requirements for this system please see our electric gate cabling guide.

Please Note: It is solely the responsibility of the recipient or the client / specifier – to ensure that the products described are suitable for purpose (see fitting guide under downloads) & comply with the relevant building regulations.

View gallery images of this item in typical MyGate Diamond Motor Only -230v/24v Linear Ram gate automation installations.

Got a question about this item?
comments powered by Disqus